FRICTION STIR WELDING
Abstract & Details
Research Area
engineering
Keywords
1. Friction 2. Welding 3.Tool 4.Stir 5.Analysis of welded Part.
Abstract
Using experimental welding data and thermal modelling the transient heat losses into FSW tools were calculated. Heat loss into the tool enabled the welding efficiency to be determined. The body of this work covered the welding of two light alloys using solid steel tools. Finally the use of grooves in the tool to impede heat flow was investigated as a way of increasing welding efficiency.
The work concludes that using solid tools the steady state heat loss into the tool is about 10%of the total heat generated; for short welds that start with a cold tool this can be higher. Grooves in the tool shank increase the thermal efficiency and stability of the welding process.
License
This work is licensed under a Creative
Commons
Attribution-ShareAlike 4.0 International License.
Author Information
| # | Name | Institute / Affiliation |
|---|---|---|
| 1 | Prof.Khair S.S | G.V.A.P. Shelu, Maharashtra , India |
| 2 | Prof.Sawant R.S. | G.V.A.P. Shelu, Maharashtra , India |
| 3 | Prof.Rathod R.R . | G.V.A.P. Shelu, Maharashtra , India |
| 4 | Prof.Pawar S.D. | G.V.A.P. Shelu, Maharashtra , India |
How to Cite
Use the following formats to cite this article in your research.
APA Style
S.S, Prof.Khair, R.S., Prof.Sawant, ., Prof.Rathod R.R, & S.D., Prof.Pawar (2018). FRICTION STIR WELDING. International Journal of Advance Research and Innovative Ideas In Education, 4(6), 221-227.
MLA Style
S.S, Prof.Khair, et al. "FRICTION STIR WELDING." International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 6, 2018, pp. 221-227.
IEEE Style
Prof.Khair S.S, Prof.Sawant R.S., Prof.Rathod R.R ., and Prof.Pawar S.D., "FRICTION STIR WELDING," International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 6, pp. 221-227, 2018.
Vancouver Style
S.S Prof.Khair, R.S. Prof.Sawant, . Prof.Rathod R.R, S.D. Prof.Pawar. FRICTION STIR WELDING. International Journal of Advance Research and Innovative Ideas In Education. 2018;4(6):221-227.
Harvard Style
S.S, Prof.Khair, R.S., Prof.Sawant, ., Prof.Rathod R.R, & S.D., Prof.Pawar (2018) 'FRICTION STIR WELDING', International Journal of Advance Research and Innovative Ideas In Education, 4(6), pp. 221-227.
Chicago Style
S.S, Prof.Khair, et al. "FRICTION STIR WELDING." International Journal of Advance Research and Innovative Ideas In Education 4, no. 6 (2018): 221-227.
Turabian Style
S.S, Prof.Khair, et al. "FRICTION STIR WELDING." International Journal of Advance Research and Innovative Ideas In Education 4, no. 6 (2018): 221-227.
Related Research
ROBUST BALANCE CONTROL OF TWO-WHEELED BICYCLES A COMPARATIVE STUDY OF H∞ LOOP SHAPING AND PID APPROACHES
PDF Unavailable
USING NEURAL NETWORKS TO PREDICT THREE-PHASE TRANSFORMER FAILURES BASED ON ELECTRICAL SIGNALS AND MECHANICAL VIBRATIONS
PDF Unavailable
APPLICATION OF VARIATIONAL QUANTUM CLASSIFIER IN FAULT CLASSIFICATION ON THREE-PHASE POWER TRANSMISSION LINE
PDF Unavailable
Review of Recent Advances in Solar Energy Technology
PDF Unavailable
Analytical Sizing and Layout of a High-Gain CMOS Comparator for Mixed-Signal Applications
PDF Unavailable
Daul power generation by using solar and windmill generator
PDF Unavailable