AN ARDUINO BASED SOLAR GRASS CUTTER

Electrical Engineering

Because of the nonstop expansion in the expense of fuel and the impact of emanation of gases from the consumed fuel into the air, this required the utilization of the bountiful sun oriented energy from the sun as a wellspring of ability to drive a grass cutter. A sunlight based fueled yard trimmer was planned and created, in view of the overall standard of cutting. The planned sun based fueled lawn mower includes direct current (D.C) motor, a battery-powered battery, sun oriented board, a treated steel edge and control switch. Cutting is accomplished by the D.C motor which gives the necessary force expected to drive the tempered steel sharp edge which is straightforwardly coupled to the shaft of the D.C motor. The framework will have a power source that is battery and a sunlight based board will be joined on the highest point of the robot. Moving the grass cutters with a standard motor fueled grass cutters is a bother, and nobody enjoys it. Cutting grass can't be handily cultivated by old, more youthful, grass cutter moving with motor make clamor contamination because of the boisterous motor, and neighborhood air contamination because of the ignition in the motor.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.