PARAMETRIC OPTIMIZATION OF CO2 LASER CUTTING  PROCESS ON SS 316USING GRA TECHNIQUES

CHIRAG PATEL; SANDIP J CHAUDHARY; PARTHKUMAR PANCHAL

PARAMETRIC OPTIMIZATION OF CO2 LASER CUTTING PROCESS ON SS 316USING GRA TECHNIQUES

April 2017

Vol-3, Issue-2

Paper ID: 4891

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

Mechanical engineering

Keywords

ANOVA DOE SS-316

Abstract

Laser cutting is mostly a thermal process in which a focused laser beam is used to melt material in a localized area. A co-axial gas jet is used to eject the molten material from the cut and leave a clean edge. A continuous cut is produced by moving the laser beam or work piece and leave a clean edge. A particular characteristic of a laser cut is the formation of striations on the cut edge. These striations play an important part in laser cutting as they effectively control the edge roughness. Laser Beam Machining is widely used manufacturing technique utilized to perform cutting, engraving and welding operations on a wide variety of materials ranging from metals to plastics. In the present work an attempt has been made to study the effect of process parameters such as feed rate, input power and gas pressure of 3 levels of each parameter on the quality of the machined surface using laser beam on stainless steel. Design of experiments is implemented by using a full factorial design. The effect of the process parameters on response have been shown by means of main effect plots developed using ANOVA analysis. After Design of Experiment (DOE) by using full factorial method, the analysis will be carry by the Analysis Of Variance (ANOVA) method and optimization will be carry Response surface methodology.

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	CHIRAG PATEL	SAFFRONY INSTITUTE OF TECHNOLOGY
2	SANDIP J CHAUDHARY	SAFFRONY INSTITUTE OF TECHNOLOGY
3	PARTHKUMAR PANCHAL	SAFFRONY INSTITUTE OF TECHNOLOGY

How to Cite

Use the following formats to cite this article in your research.

APA Style

PATEL, CHIRAG, CHAUDHARY, SANDIP J, & PANCHAL, PARTHKUMAR (2017). PARAMETRIC OPTIMIZATION OF CO2 LASER CUTTING PROCESS ON SS 316USING GRA TECHNIQUES. International Journal of Advance Research and Innovative Ideas In Education, 3(2), 5086-5091.

MLA Style

PATEL, CHIRAG, et al. "PARAMETRIC OPTIMIZATION OF CO2 LASER CUTTING PROCESS ON SS 316USING GRA TECHNIQUES." International Journal of Advance Research and Innovative Ideas In Education, vol. 3, no. 2, 2017, pp. 5086-5091.

IEEE Style

CHIRAG PATEL, SANDIP J CHAUDHARY, and PARTHKUMAR PANCHAL, "PARAMETRIC OPTIMIZATION OF CO2 LASER CUTTING PROCESS ON SS 316USING GRA TECHNIQUES," International Journal of Advance Research and Innovative Ideas In Education, vol. 3, no. 2, pp. 5086-5091, 2017.

Vancouver Style

PATEL CHIRAG, CHAUDHARY SANDIP J, PANCHAL PARTHKUMAR. PARAMETRIC OPTIMIZATION OF CO2 LASER CUTTING PROCESS ON SS 316USING GRA TECHNIQUES. International Journal of Advance Research and Innovative Ideas In Education. 2017;3(2):5086-5091.

Harvard Style

PATEL, CHIRAG, CHAUDHARY, SANDIP J, & PANCHAL, PARTHKUMAR (2017) 'PARAMETRIC OPTIMIZATION OF CO2 LASER CUTTING PROCESS ON SS 316USING GRA TECHNIQUES', International Journal of Advance Research and Innovative Ideas In Education, 3(2), pp. 5086-5091.

Chicago Style

PATEL, CHIRAG, SANDIP J CHAUDHARY, and PARTHKUMAR PANCHAL. "PARAMETRIC OPTIMIZATION OF CO2 LASER CUTTING PROCESS ON SS 316USING GRA TECHNIQUES." International Journal of Advance Research and Innovative Ideas In Education 3, no. 2 (2017): 5086-5091.

Turabian Style

PATEL, CHIRAG, SANDIP J CHAUDHARY, and PARTHKUMAR PANCHAL. "PARAMETRIC OPTIMIZATION OF CO2 LASER CUTTING PROCESS ON SS 316USING GRA TECHNIQUES." International Journal of Advance Research and Innovative Ideas In Education 3, no. 2 (2017): 5086-5091.