A Review on Modeling and Investigation of  Chang in Working Parameters on the  Performance of the Vortex Tube with CFD  Analysis

Mr .Godse Sachin; Devendra singh Sikarwar

A Review on Modeling and Investigation of Chang in Working Parameters on the Performance of the Vortex Tube with CFD Analysis

July 2016

Vol-2, Issue-4

Paper ID: 2891

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

Thermal Engineering

Keywords

Working parameter Geometric parameter COP CFD.

Abstract

The vortex tube performance depends on two types of parameters, firstly air or working parameters such as inlet pressure of compressed air, cold mass fraction and secondly tube or geometric parameters such as length of hot side tube, cold orifice diameter, number of nozzles, diameter of nozzle, cone valve angle and also material of vortex tube affects Coefficient of Performance (COP). This paper discusses the experimental investigation of effect of above working parameters on the performance of Ranque Hilsch vortex tube. The paper develops three dimensional flow domain using Computational Fluid Dynamics (CFD) and this CFD and experimental studies are conducted towards the optimization of RHVT. The cast iron material has been used for manufacturing of the vortex tube as it has lower thermal conductivity and less fluid friction losses. In this experimental study the performance of vortex tube has been tested with compressed air at various pressures from 5-10 bar, which supplied through two tangential inlet nozzles. The L/D ratio of hot side tube varied from 10-50.

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	Mr .Godse Sachin	Patel college of science and Technology
2	Devendra singh Sikarwar	Patel college of science and Technology

How to Cite

Use the following formats to cite this article in your research.

APA Style

Sachin, Mr .Godse & Sikarwar, Devendra singh (2016). A Review on Modeling and Investigation of Chang in Working Parameters on the Performance of the Vortex Tube with CFD Analysis. International Journal of Advance Research and Innovative Ideas In Education, 2(4), 440-446.

MLA Style

Sachin, Mr .Godse, and Devendra singh Sikarwar. "A Review on Modeling and Investigation of Chang in Working Parameters on the Performance of the Vortex Tube with CFD Analysis." International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 4, 2016, pp. 440-446.

IEEE Style

Mr .Godse Sachin and Devendra singh Sikarwar, "A Review on Modeling and Investigation of Chang in Working Parameters on the Performance of the Vortex Tube with CFD Analysis," International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 4, pp. 440-446, 2016.

Vancouver Style

Sachin Mr .Godse, Sikarwar Devendra singh. A Review on Modeling and Investigation of Chang in Working Parameters on the Performance of the Vortex Tube with CFD Analysis. International Journal of Advance Research and Innovative Ideas In Education. 2016;2(4):440-446.

Harvard Style

Sachin, Mr .Godse & Sikarwar, Devendra singh (2016) 'A Review on Modeling and Investigation of Chang in Working Parameters on the Performance of the Vortex Tube with CFD Analysis', International Journal of Advance Research and Innovative Ideas In Education, 2(4), pp. 440-446.

Chicago Style

Sachin, Mr .Godse and Devendra singh Sikarwar. "A Review on Modeling and Investigation of Chang in Working Parameters on the Performance of the Vortex Tube with CFD Analysis." International Journal of Advance Research and Innovative Ideas In Education 2, no. 4 (2016): 440-446.

Turabian Style

Sachin, Mr .Godse and Devendra singh Sikarwar. "A Review on Modeling and Investigation of Chang in Working Parameters on the Performance of the Vortex Tube with CFD Analysis." International Journal of Advance Research and Innovative Ideas In Education 2, no. 4 (2016): 440-446.