“DESIGN A GUARD TO AVOID THE TEMPERATURE LOSS DURING MANIPULATION”
Abstract & Details
Research Area
Production Engineering
Keywords
Guard
Fixed
Glass wool etc.
Abstract
As Conventional process in manufacturing of pipe, in middle stages hot pipe losses its temperature; such as after de-oxidation hot pipe is lifted by a manipulator and travel towards the PQF stations for rolling at a speed of 5m/s. During this manipulation hot pipe losses its temperature up to 50-70⁰ c.
At the stage between HBM and PQF mill there is a temperature loss at this stage. To avoid these temperature losses we designed a guard of mild steel which fitted over the lifter. Also to protect this guard from heat exchange we covered the guard with insulating material i.e. Glass wool.
License
This work is licensed under a Creative
Commons
Attribution-ShareAlike 4.0 International License.
Author Information
| # | Name | Institute / Affiliation |
|---|---|---|
| 1 | kokane chetan vilas | AVCOE, Sangamner |
| 2 | lahamage nagesh yadav | AVCOE, Sangamner |
| 3 | karpe sanket macchindranath | AVCOE, Sangamner |
How to Cite
Use the following formats to cite this article in your research.
APA Style
vilas, kokane chetan, yadav, lahamage nagesh, & macchindranath, karpe sanket (2016). “DESIGN A GUARD TO AVOID THE TEMPERATURE LOSS DURING MANIPULATION”. International Journal of Advance Research and Innovative Ideas In Education, 2(3), 2940-2946.
MLA Style
vilas, kokane chetan, et al. "“DESIGN A GUARD TO AVOID THE TEMPERATURE LOSS DURING MANIPULATION”." International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 3, 2016, pp. 2940-2946.
IEEE Style
kokane chetan vilas, lahamage nagesh yadav, and karpe sanket macchindranath, "“DESIGN A GUARD TO AVOID THE TEMPERATURE LOSS DURING MANIPULATION”," International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 3, pp. 2940-2946, 2016.
Vancouver Style
vilas kokane chetan, yadav lahamage nagesh, macchindranath karpe sanket. “DESIGN A GUARD TO AVOID THE TEMPERATURE LOSS DURING MANIPULATION”. International Journal of Advance Research and Innovative Ideas In Education. 2016;2(3):2940-2946.
Harvard Style
vilas, kokane chetan, yadav, lahamage nagesh, & macchindranath, karpe sanket (2016) '“DESIGN A GUARD TO AVOID THE TEMPERATURE LOSS DURING MANIPULATION”', International Journal of Advance Research and Innovative Ideas In Education, 2(3), pp. 2940-2946.
Chicago Style
vilas, kokane chetan, lahamage nagesh yadav, and karpe sanket macchindranath. "“DESIGN A GUARD TO AVOID THE TEMPERATURE LOSS DURING MANIPULATION”." International Journal of Advance Research and Innovative Ideas In Education 2, no. 3 (2016): 2940-2946.
Turabian Style
vilas, kokane chetan, lahamage nagesh yadav, and karpe sanket macchindranath. "“DESIGN A GUARD TO AVOID THE TEMPERATURE LOSS DURING MANIPULATION”." International Journal of Advance Research and Innovative Ideas In Education 2, no. 3 (2016): 2940-2946.
Related Research
Optimization of Drilling Parameters for Aluminium Alloy to Minimize Ovality and Surface Roughness Using a Multi-Objective Approach
PDF Unavailable
SUPPLIER RELATIONSHIP MANAGEMENT AND THE PERFORMANCE OF MICRO, SMALL AND MEDIUM ENTERPRISES IN NAIROBI CITY COUNTY, KENYA
PDF Unavailable
Formulation and Development of Nimesulide Micro-Encapsulation by Fluidized Bed Processor
PDF Unavailable
EFFECT OF DEEP DRAW RADIUS IN DEEP DRAWING PROCESS WITH DIFFERENT PUNCHING LOADS IN FORMABILITY OF ALUMINIUM 6061
PDF Unavailable
THE EFFECT OF FREIGHT FOWARDING ON PERFORMANCE OF DRY PORTS IN KENYA, A CASE OF INLAND CONTAINER DEPOT, NAIROBI
PDF Unavailable
INFLUENCE OF LOGISTICS RISK MANAGEMENT PRACTICES ON FIRM PERFORMANCE A CASE STUDY OF THE NEW KCC KENYA
PDF Unavailable
EXPERIMENTAL ANALYSIS OF TEMPERING TEMPERATURE AND TIME ON MECHANICAL PROPERTIES OF AISI 1040 STEEL
PDF Unavailable
Effect of Spot Welding in Steel: A Generalized Review
PDF Unavailable