FINITE ELEMENT ANALYSIS OF SOLIDIFICATION OF L-SHAPED CASTING USING ANSYS PARAMETRIC DESIGN LANGUAGE

Buddh Vilash Patel; Dushyant Diwedi

FINITE ELEMENT ANALYSIS OF SOLIDIFICATION OF L-SHAPED CASTING USING ANSYS PARAMETRIC DESIGN LANGUAGE

November 2015

Vol-1, Issue-5

Paper ID: 1345

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

Production Engineering

Keywords

Casting Solidification Heat Transfer Thermal Gradient Flux

Abstract

The complexity of process of solidification has urged the engineers to simulate the process before actually carrying out the casting procedure . Finite element method is used to simulate the heat transfer process accompanying the solidification process. The metal and the mould along with the air gap formation is accounted in the heat transfer simulation. Distortion of the casting is caused due to non-uniform shrinkage associated with the process. Residual stresses are induced in the final castings. In this thesis, transient heat transfer analysis of an L Shaped casting is presented. Contours of various parameters viz; thermal gradient, thermal flux and temperature distribution are obtained using ANSYS commercial finite element analysis code. The simulations are compared with available experimental data and the comparison is found to be good. Special considerations regarding the simulation of solidification process are also brought out.

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	Buddh Vilash Patel	Vikrant Institute of Technology and Management
2	Dushyant Diwedi	Vikrant Institute of Technology and Management

How to Cite

Use the following formats to cite this article in your research.

APA Style

Patel, Buddh Vilash & Diwedi, Dushyant (2015). FINITE ELEMENT ANALYSIS OF SOLIDIFICATION OF L-SHAPED CASTING USING ANSYS PARAMETRIC DESIGN LANGUAGE. International Journal of Advance Research and Innovative Ideas In Education, 1(5), 87-95.

MLA Style

Patel, Buddh Vilash, and Dushyant Diwedi. "FINITE ELEMENT ANALYSIS OF SOLIDIFICATION OF L-SHAPED CASTING USING ANSYS PARAMETRIC DESIGN LANGUAGE." International Journal of Advance Research and Innovative Ideas In Education, vol. 1, no. 5, 2015, pp. 87-95.

IEEE Style

Buddh Vilash Patel and Dushyant Diwedi, "FINITE ELEMENT ANALYSIS OF SOLIDIFICATION OF L-SHAPED CASTING USING ANSYS PARAMETRIC DESIGN LANGUAGE," International Journal of Advance Research and Innovative Ideas In Education, vol. 1, no. 5, pp. 87-95, 2015.

Vancouver Style

Patel Buddh Vilash, Diwedi Dushyant. FINITE ELEMENT ANALYSIS OF SOLIDIFICATION OF L-SHAPED CASTING USING ANSYS PARAMETRIC DESIGN LANGUAGE. International Journal of Advance Research and Innovative Ideas In Education. 2015;1(5):87-95.

Harvard Style

Patel, Buddh Vilash & Diwedi, Dushyant (2015) 'FINITE ELEMENT ANALYSIS OF SOLIDIFICATION OF L-SHAPED CASTING USING ANSYS PARAMETRIC DESIGN LANGUAGE', International Journal of Advance Research and Innovative Ideas In Education, 1(5), pp. 87-95.

Chicago Style

Patel, Buddh Vilash and Dushyant Diwedi. "FINITE ELEMENT ANALYSIS OF SOLIDIFICATION OF L-SHAPED CASTING USING ANSYS PARAMETRIC DESIGN LANGUAGE." International Journal of Advance Research and Innovative Ideas In Education 1, no. 5 (2015): 87-95.

Turabian Style

Patel, Buddh Vilash and Dushyant Diwedi. "FINITE ELEMENT ANALYSIS OF SOLIDIFICATION OF L-SHAPED CASTING USING ANSYS PARAMETRIC DESIGN LANGUAGE." International Journal of Advance Research and Innovative Ideas In Education 1, no. 5 (2015): 87-95.