EFFECT OF ENTRY MATERIAL ON SURFACE ROUGHNESS IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI DESIGN METHOD

Namita Godge; Prof. R. S. Tajane

EFFECT OF ENTRY MATERIAL ON SURFACE ROUGHNESS IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI DESIGN METHOD

June 2019

Vol-5, Issue-4

Paper ID: 10575

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

Production Engineering

Keywords

Drilling Taguchi method Surface roughness ANOVA Minitab 16

Abstract

In this work, different entry materials were micro drilled for printed circuit board. The optimization of different parameters is done by using Taguchi Approach. In this experiment L16 orthogonal array is used with three controllable factors like spindle Speed, feed and material with four levels of each to find out optimum level of parameters to minimize the surface roughness. The ANOVA results used to find out significant factor and percentage contribution of individual factor. From ANOVA analysis it is found that Spindle speed is most contributing factor for surface roughness with contribution of 67.66%. Confirmation tests have been carried out to predict the optimal setting of process parameters to validate the proposed method

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	Namita Godge	Amrutvahini College of Engineering
2	Prof. R. S. Tajane	Amrutvahini College of Engineering

How to Cite

Use the following formats to cite this article in your research.

APA Style

Godge, Namita & Tajane, Prof. R. S. (2019). EFFECT OF ENTRY MATERIAL ON SURFACE ROUGHNESS IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI DESIGN METHOD. International Journal of Advance Research and Innovative Ideas In Education, 5(4), 46-53.

MLA Style

Godge, Namita, and Prof. R. S. Tajane. "EFFECT OF ENTRY MATERIAL ON SURFACE ROUGHNESS IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI DESIGN METHOD." International Journal of Advance Research and Innovative Ideas In Education, vol. 5, no. 4, 2019, pp. 46-53.

IEEE Style

Namita Godge and Prof. R. S. Tajane, "EFFECT OF ENTRY MATERIAL ON SURFACE ROUGHNESS IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI DESIGN METHOD," International Journal of Advance Research and Innovative Ideas In Education, vol. 5, no. 4, pp. 46-53, 2019.

Vancouver Style

Godge Namita, Tajane Prof. R. S.. EFFECT OF ENTRY MATERIAL ON SURFACE ROUGHNESS IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI DESIGN METHOD. International Journal of Advance Research and Innovative Ideas In Education. 2019;5(4):46-53.

Harvard Style

Godge, Namita & Tajane, Prof. R. S. (2019) 'EFFECT OF ENTRY MATERIAL ON SURFACE ROUGHNESS IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI DESIGN METHOD', International Journal of Advance Research and Innovative Ideas In Education, 5(4), pp. 46-53.

Chicago Style

Godge, Namita and Prof. R. S. Tajane. "EFFECT OF ENTRY MATERIAL ON SURFACE ROUGHNESS IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI DESIGN METHOD." International Journal of Advance Research and Innovative Ideas In Education 5, no. 4 (2019): 46-53.

Turabian Style

Godge, Namita and Prof. R. S. Tajane. "EFFECT OF ENTRY MATERIAL ON SURFACE ROUGHNESS IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI DESIGN METHOD." International Journal of Advance Research and Innovative Ideas In Education 5, no. 4 (2019): 46-53.