PROCESS PARAMETER OPTIMIZATION IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI METHOD

Namita Godge; Prof. R. S. Tajane

PROCESS PARAMETER OPTIMIZATION IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI METHOD

June 2019

Vol-5, Issue-4

Paper ID: 10574

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

Production Engineering

Keywords

Drilling Taguchi method Surface roughness ANOVA Minitab 16

Abstract

PCB is laminated composite material consisting of copper foils, resin and glass fiber cloth. So it is troublesome to drill deeper holes at high productivity and high exactness. In this work, different entry materials were micro drilled for printed circuit board. The optimization of different parameters is done by using Taguchi Approach. In this experiment L16 orthogonal array is used with three controllable factors like spindle Speed, feed and material with four levels of each to find out optimum level of parameters to minimize the surface roughness. The ANOVA results used to find out significant factor and percentage contribution of individual factor. From ANOVA analysis it is found that Spindle speed is most contributing factor for surface roughness with contribution of 67.66%.

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	Namita Godge	Amrutvahini College of Engineering
2	Prof. R. S. Tajane	Prof. R. S. Tajane2

How to Cite

Use the following formats to cite this article in your research.

APA Style

Godge, Namita & Tajane, Prof. R. S. (2019). PROCESS PARAMETER OPTIMIZATION IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI METHOD. International Journal of Advance Research and Innovative Ideas In Education, 5(4), 1-9.

MLA Style

Godge, Namita, and Prof. R. S. Tajane. "PROCESS PARAMETER OPTIMIZATION IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI METHOD." International Journal of Advance Research and Innovative Ideas In Education, vol. 5, no. 4, 2019, pp. 1-9.

IEEE Style

Namita Godge and Prof. R. S. Tajane, "PROCESS PARAMETER OPTIMIZATION IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI METHOD," International Journal of Advance Research and Innovative Ideas In Education, vol. 5, no. 4, pp. 1-9, 2019.

Vancouver Style

Godge Namita, Tajane Prof. R. S.. PROCESS PARAMETER OPTIMIZATION IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI METHOD. International Journal of Advance Research and Innovative Ideas In Education. 2019;5(4):1-9.

Harvard Style

Godge, Namita & Tajane, Prof. R. S. (2019) 'PROCESS PARAMETER OPTIMIZATION IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI METHOD', International Journal of Advance Research and Innovative Ideas In Education, 5(4), pp. 1-9.

Chicago Style

Godge, Namita and Prof. R. S. Tajane. "PROCESS PARAMETER OPTIMIZATION IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI METHOD." International Journal of Advance Research and Innovative Ideas In Education 5, no. 4 (2019): 1-9.

Turabian Style

Godge, Namita and Prof. R. S. Tajane. "PROCESS PARAMETER OPTIMIZATION IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI METHOD." International Journal of Advance Research and Innovative Ideas In Education 5, no. 4 (2019): 1-9.