Optimization of Drilling Parameters by Usings Taguchi Method – Research Paper
Abstract & Details
Research Area
Mechanical Engineering
Keywords
taguchi
drilling
optimization
Abstract
Abstract - We have done Optimization of drilling parameters using the Taguchi method to obtain minimum surface roughness (Ra). Number of drilling experiments were conducted using the L9 orthogonal array on a CNC vertical machining center. The drilling experiments were performed on EN-24 steel blocks/plates using uncoated M10 HSS twist drills under dry cutting conditions. Signal to Noise (S/N) ratio was used to optimize control factors which are affecting the surface roughness. The cutting speed and feed rate were selected as control factors. After the trials nine experiments, it was found that the cutting speed was the most significant factor on the surface roughness. The results of the confirmation experiments showed that the Taguchi method was notably successful in the optimization of drilling parameters for better minimum surface roughness.
License
This work is licensed under a Creative
Commons
Attribution-ShareAlike 4.0 International License.
Author Information
| # | Name | Institute / Affiliation |
|---|---|---|
| 1 | Bhushan Keshav Dambale | Sir Visvesvaraya Institute of Technology |
| 2 | Saurabh Satish Aher | Sir Visvesvaraya Institute of Technology |
| 3 | Gokul Rajendra Phad | Sir Visvesvaraya Institute of Technology |
| 4 | Kajal Kiran Kuyate | Sir Visvesvaraya Institute of Technology |
| 5 | Abhijit Sonawane | Sir Visvesvaraya Institute of Technology |
How to Cite
Use the following formats to cite this article in your research.
APA Style
Dambale, Bhushan Keshav, Aher, Saurabh Satish, Phad, Gokul Rajendra, Kuyate, Kajal Kiran, & Sonawane, Abhijit (2019). Optimization of Drilling Parameters by Usings Taguchi Method – Research Paper. International Journal of Advance Research and Innovative Ideas In Education, 5(1), 230-235.
MLA Style
Dambale, Bhushan Keshav, et al. "Optimization of Drilling Parameters by Usings Taguchi Method – Research Paper." International Journal of Advance Research and Innovative Ideas In Education, vol. 5, no. 1, 2019, pp. 230-235.
IEEE Style
Bhushan Keshav Dambale, Saurabh Satish Aher, Gokul Rajendra Phad, Kajal Kiran Kuyate, and Abhijit Sonawane, "Optimization of Drilling Parameters by Usings Taguchi Method – Research Paper," International Journal of Advance Research and Innovative Ideas In Education, vol. 5, no. 1, pp. 230-235, 2019.
Vancouver Style
Dambale Bhushan Keshav, Aher Saurabh Satish, Phad Gokul Rajendra, Kuyate Kajal Kiran, Sonawane Abhijit. Optimization of Drilling Parameters by Usings Taguchi Method – Research Paper. International Journal of Advance Research and Innovative Ideas In Education. 2019;5(1):230-235.
Harvard Style
Dambale, Bhushan Keshav, Aher, Saurabh Satish, Phad, Gokul Rajendra, Kuyate, Kajal Kiran, & Sonawane, Abhijit (2019) 'Optimization of Drilling Parameters by Usings Taguchi Method – Research Paper', International Journal of Advance Research and Innovative Ideas In Education, 5(1), pp. 230-235.
Chicago Style
Dambale, Bhushan Keshav, et al. "Optimization of Drilling Parameters by Usings Taguchi Method – Research Paper." International Journal of Advance Research and Innovative Ideas In Education 5, no. 1 (2019): 230-235.
Turabian Style
Dambale, Bhushan Keshav, et al. "Optimization of Drilling Parameters by Usings Taguchi Method – Research Paper." International Journal of Advance Research and Innovative Ideas In Education 5, no. 1 (2019): 230-235.
Related Research
Designing And Manufacturing Of Mecanum Wheel
PDF Unavailable
Experimental, Design and Development of different punch and die for head light reflectors
PDF Unavailable
Experimental Analysis of Aluminium Hybrid Material using Analytical and Experimental Method
PDF Unavailable
Effect of Slight Pitch Difference on the Fatigue Life of Bolt
PDF Unavailable