THERMAL ANALYSIS AND MATERIAL OPTIMIZATION OF PISTON IN IC ENGINE

N.Prithiviraj; K.Vengatesvaran; N. Periyasamy

THERMAL ANALYSIS AND MATERIAL OPTIMIZATION OF PISTON IN IC ENGINE

April 2018

Vol-4, Issue-3

Paper ID: 8215

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

Mechanical Engineering

Keywords

PRO-E ANSYS Von misses Stress Computer CAD CAE Optimization.

Abstract

The main objective of this study is to explore the analysis of a piston with design change to attain less volume and better efficiency. This has entailed performing a detailed thermal analysis. The study deals with dynamic, model and transient thermal analysis. A proper Finite Element Model is developed using CAD software Pro/E Wildfire 5.0. In this project we are doing the material optimization in the piston. This project we are designed the 3D model of the axle by using pro-e software and the analysis taken by different materials of the bearing and the analysis taken by the ANSYS software. This project we are analyzing the pressure acting on the piston by the two materials. Presently the piston is made by the material of AL-Mg-Si, this project we are testing the same load under SILUMIN. Then the thermal analysis is done to determine the total heat flux in the existing piston for the given temperature conditions. The temperature acting on the surface of the piston is applied. The results were also used to determine the total heat flux for a particular material.

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	N.Prithiviraj	Gnanamani Educational Institutions, Namakkal
2	K.Vengatesvaran	Gnanamani Educational Institutions, Namakkal
3	N. Periyasamy	Gnanamani Educational Institutions, Namakkal

How to Cite

Use the following formats to cite this article in your research.

APA Style

N.Prithiviraj, K.Vengatesvaran, & Periyasamy, N. (2018). THERMAL ANALYSIS AND MATERIAL OPTIMIZATION OF PISTON IN IC ENGINE. International Journal of Advance Research and Innovative Ideas In Education, 4(3), 153-170.

MLA Style

N.Prithiviraj, et al. "THERMAL ANALYSIS AND MATERIAL OPTIMIZATION OF PISTON IN IC ENGINE." International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 3, 2018, pp. 153-170.

IEEE Style

N.Prithiviraj, K.Vengatesvaran, and N. Periyasamy, "THERMAL ANALYSIS AND MATERIAL OPTIMIZATION OF PISTON IN IC ENGINE," International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 3, pp. 153-170, 2018.

Vancouver Style

N.Prithiviraj, K.Vengatesvaran, Periyasamy N.. THERMAL ANALYSIS AND MATERIAL OPTIMIZATION OF PISTON IN IC ENGINE. International Journal of Advance Research and Innovative Ideas In Education. 2018;4(3):153-170.

Harvard Style

N.Prithiviraj, K.Vengatesvaran, & Periyasamy, N. (2018) 'THERMAL ANALYSIS AND MATERIAL OPTIMIZATION OF PISTON IN IC ENGINE', International Journal of Advance Research and Innovative Ideas In Education, 4(3), pp. 153-170.

Chicago Style

N.Prithiviraj, K.Vengatesvaran, and N. Periyasamy. "THERMAL ANALYSIS AND MATERIAL OPTIMIZATION OF PISTON IN IC ENGINE." International Journal of Advance Research and Innovative Ideas In Education 4, no. 3 (2018): 153-170.

Turabian Style

N.Prithiviraj, K.Vengatesvaran, and N. Periyasamy. "THERMAL ANALYSIS AND MATERIAL OPTIMIZATION OF PISTON IN IC ENGINE." International Journal of Advance Research and Innovative Ideas In Education 4, no. 3 (2018): 153-170.