OPTIMIZATION OF A-TIG WELDING PARAMETERS FOR IMPROVING WELD GEOMETRY OF AISI 304L STAINLESS STEEL BY TAGUCHI APPROACH

GANESH S MUDALIYAR; PRIYANK B PATEL; J.D. Patel; AYESHA M DOI

OPTIMIZATION OF A-TIG WELDING PARAMETERS FOR IMPROVING WELD GEOMETRY OF AISI 304L STAINLESS STEEL BY TAGUCHI APPROACH

April 2018

Vol-4, Issue-2

Paper ID: 8039

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

PRODUCTION ENGINEERING

Keywords

A-TIG ANOVA TAGUCHI FLUX ANGULAR DISTORTION DEPTH OF PENETRATION WELD BEAD WIDTH

Abstract

Gas tungsten arc welding (GTAW)welding has an inherent difficulty in achieving deep penetration. The depth of penetration that can be achieved in 6mm thick S. S plate with conventional GTAW welding is approx. 2.5 mm which can be enhanced by silicon dioxide flux. The aim of the research work is to identify the effect of silicon dioxide flux on weld geometry and analyse it. Silicon dioxide flux plays a major role in influencing the various properties of stainless steel GTAW welds. Input parameters of GTAW mainly welding speed, current, Arc frequency etc. have been taken to find out the effect of input parameters on weld bead geometry. However, investigation is based on Taguchi method to determine the influence of process parameter and to optimize them.

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	GANESH S MUDALIYAR	MERCHANT ENGINEERING COLLEGE
2	PRIYANK B PATEL	MERCHANT INSTITUTE OF TECHNOLOGY
3	J.D. Patel	MERCHANT INSTITUTE OF TECHNOLOGY
4	AYESHA M DOI	GOVERNMENT POLYTECHNIC HIMATNAGAR

How to Cite

Use the following formats to cite this article in your research.

APA Style

MUDALIYAR, GANESH S, PATEL, PRIYANK B, Patel, J.D., & DOI, AYESHA M (2018). OPTIMIZATION OF A-TIG WELDING PARAMETERS FOR IMPROVING WELD GEOMETRY OF AISI 304L STAINLESS STEEL BY TAGUCHI APPROACH. International Journal of Advance Research and Innovative Ideas In Education, 4(2), 2741-2750.

MLA Style

MUDALIYAR, GANESH S, et al. "OPTIMIZATION OF A-TIG WELDING PARAMETERS FOR IMPROVING WELD GEOMETRY OF AISI 304L STAINLESS STEEL BY TAGUCHI APPROACH." International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 2, 2018, pp. 2741-2750.

IEEE Style

GANESH S MUDALIYAR, PRIYANK B PATEL, J.D. Patel, and AYESHA M DOI, "OPTIMIZATION OF A-TIG WELDING PARAMETERS FOR IMPROVING WELD GEOMETRY OF AISI 304L STAINLESS STEEL BY TAGUCHI APPROACH," International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 2, pp. 2741-2750, 2018.

Vancouver Style

MUDALIYAR GANESH S, PATEL PRIYANK B, Patel J.D., DOI AYESHA M. OPTIMIZATION OF A-TIG WELDING PARAMETERS FOR IMPROVING WELD GEOMETRY OF AISI 304L STAINLESS STEEL BY TAGUCHI APPROACH. International Journal of Advance Research and Innovative Ideas In Education. 2018;4(2):2741-2750.

Harvard Style

MUDALIYAR, GANESH S, PATEL, PRIYANK B, Patel, J.D., & DOI, AYESHA M (2018) 'OPTIMIZATION OF A-TIG WELDING PARAMETERS FOR IMPROVING WELD GEOMETRY OF AISI 304L STAINLESS STEEL BY TAGUCHI APPROACH', International Journal of Advance Research and Innovative Ideas In Education, 4(2), pp. 2741-2750.

Chicago Style

MUDALIYAR, GANESH S, et al. "OPTIMIZATION OF A-TIG WELDING PARAMETERS FOR IMPROVING WELD GEOMETRY OF AISI 304L STAINLESS STEEL BY TAGUCHI APPROACH." International Journal of Advance Research and Innovative Ideas In Education 4, no. 2 (2018): 2741-2750.

Turabian Style

MUDALIYAR, GANESH S, et al. "OPTIMIZATION OF A-TIG WELDING PARAMETERS FOR IMPROVING WELD GEOMETRY OF AISI 304L STAINLESS STEEL BY TAGUCHI APPROACH." International Journal of Advance Research and Innovative Ideas In Education 4, no. 2 (2018): 2741-2750.