OPTIMIZATION OF PROCESS PARAMETER OF MIG WELDING ON MS IS2062 MATERIAL

PATEL SUMITKUMAR SURESHBHAI; RAVAL HARSHILKUMAR BHAVIKKUMAR; GANDHI  KARANKUMAR  SHASHIKANTBHAI; SUTHAR CHIRAG DILIPBHAI; PATEL SUNILKUMAR JAGDISHBHAI

OPTIMIZATION OF PROCESS PARAMETER OF MIG WELDING ON MS IS2062 MATERIAL

April 2018

Vol-4, Issue-2

Paper ID: 7945

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

Mechanical Engineering

Keywords

current voltage gas pressure penetration signal to noise ratio MS IS2062.

Abstract

Gas metal arc welding with filler wire addition is a candidate process for welding MS IS2062.In GMAW the quality of the weld is characterized by the weld bead geometry as it influences the mechanical properties and its performance during service. This work focus on the development of Taguchi method and optimization using signal to noise ratio for determining the optimum/near-optimum GMAW process parameter for obtaining the optimum weld bead geometry during welding of MS IS2062.Parameter selected for study were welding voltage,welding current and gas pressure and response selected was penetration. The optimum values of parameter found using taguchi tool are welding voltage 21V, Welding current 190Amp and Gas pressure 20bar.Optimum value of weld penetration was 2.57mm. Key Words- GMAW, Signal to Noise Ratio, Current, Voltage, Gas pressure, Penetration

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	PATEL SUMITKUMAR SURESHBHAI	Samarth College of engineering & technology
2	RAVAL HARSHILKUMAR BHAVIKKUMAR	Samarth College of engineering & technology
3	GANDHI KARANKUMAR SHASHIKANTBHAI	Samarth College of engineering & technology
4	SUTHAR CHIRAG DILIPBHAI	Samarth College of engineering & technology
5	PATEL SUNILKUMAR JAGDISHBHAI	Samarth College of engineering & technology

How to Cite

Use the following formats to cite this article in your research.

APA Style

SURESHBHAI, PATEL SUMITKUMAR, BHAVIKKUMAR, RAVAL HARSHILKUMAR, SHASHIKANTBHAI, GANDHI KARANKUMAR , DILIPBHAI, SUTHAR CHIRAG, & JAGDISHBHAI, PATEL SUNILKUMAR (2018). OPTIMIZATION OF PROCESS PARAMETER OF MIG WELDING ON MS IS2062 MATERIAL. International Journal of Advance Research and Innovative Ideas In Education, 4(2), 2251-2258.

MLA Style

SURESHBHAI, PATEL SUMITKUMAR, et al. "OPTIMIZATION OF PROCESS PARAMETER OF MIG WELDING ON MS IS2062 MATERIAL." International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 2, 2018, pp. 2251-2258.

IEEE Style

PATEL SUMITKUMAR SURESHBHAI, RAVAL HARSHILKUMAR BHAVIKKUMAR, GANDHI KARANKUMAR SHASHIKANTBHAI, SUTHAR CHIRAG DILIPBHAI, and PATEL SUNILKUMAR JAGDISHBHAI, "OPTIMIZATION OF PROCESS PARAMETER OF MIG WELDING ON MS IS2062 MATERIAL," International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 2, pp. 2251-2258, 2018.

Vancouver Style

SURESHBHAI PATEL SUMITKUMAR, BHAVIKKUMAR RAVAL HARSHILKUMAR, SHASHIKANTBHAI GANDHI KARANKUMAR , DILIPBHAI SUTHAR CHIRAG, JAGDISHBHAI PATEL SUNILKUMAR. OPTIMIZATION OF PROCESS PARAMETER OF MIG WELDING ON MS IS2062 MATERIAL. International Journal of Advance Research and Innovative Ideas In Education. 2018;4(2):2251-2258.

Harvard Style

SURESHBHAI, PATEL SUMITKUMAR, BHAVIKKUMAR, RAVAL HARSHILKUMAR, SHASHIKANTBHAI, GANDHI KARANKUMAR , DILIPBHAI, SUTHAR CHIRAG, & JAGDISHBHAI, PATEL SUNILKUMAR (2018) 'OPTIMIZATION OF PROCESS PARAMETER OF MIG WELDING ON MS IS2062 MATERIAL', International Journal of Advance Research and Innovative Ideas In Education, 4(2), pp. 2251-2258.

Chicago Style

SURESHBHAI, PATEL SUMITKUMAR, et al. "OPTIMIZATION OF PROCESS PARAMETER OF MIG WELDING ON MS IS2062 MATERIAL." International Journal of Advance Research and Innovative Ideas In Education 4, no. 2 (2018): 2251-2258.

Turabian Style

SURESHBHAI, PATEL SUMITKUMAR, et al. "OPTIMIZATION OF PROCESS PARAMETER OF MIG WELDING ON MS IS2062 MATERIAL." International Journal of Advance Research and Innovative Ideas In Education 4, no. 2 (2018): 2251-2258.