ANALYSIS AND OPTIMISATION OF SURFACE ROUGHNESS IN AL2014 USING END MILLING UNDER DRY AND WET CONDITIONS

S.RAM SURYA PRAKASH; R.V.RISHI REVANTH; P.PALANIKUMAR; V.MUGUNDAN

ANALYSIS AND OPTIMISATION OF SURFACE ROUGHNESS IN AL2014 USING END MILLING UNDER DRY AND WET CONDITIONS

April 2018

Vol-4, Issue-2

Paper ID: 7849

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

MECHANICAL ENGINEERING

Keywords

Surface Roughness Face Milling AL2014 Feed Factor CMM.

Abstract

The purpose of this research was to investigate the effect of the main factors on the surface roughness in Al 2014 face milling. The results of the research could be applied in the manufacture of automotive components and mold industry. The study was conducted by using computer numerical controlled (CNC) milling machine with 63 millimeter diameters fine type carbide tool with twin cutting edge. For this experiment we used Taguchi designs. The result revealed that the factors affected the surface roughness were the depth of cut while the speed unaffected the surface roughness. Low Surface roughness value and Flatness Error were obtained during the dry condition with high speed face milling operation. Flatness error mainly affected with feed factor percentage of 41% verified through CMM

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	S.RAM SURYA PRAKASH	K.RAMAKRISHNAN COLLEGE OF ENGINEERING
2	R.V.RISHI REVANTH	K.RAMAKRISHNAN COLLEGE OF ENGINEERING
3	P.PALANIKUMAR	K.RAMAKRISHNAN COLLEGE OF ENGINEERING
4	V.MUGUNDAN	K.RAMAKRISHNAN COLLEGE OF ENGINEERING

How to Cite

Use the following formats to cite this article in your research.

APA Style

PRAKASH, S.RAM SURYA, REVANTH, R.V.RISHI, P.PALANIKUMAR, & V.MUGUNDAN (2018). ANALYSIS AND OPTIMISATION OF SURFACE ROUGHNESS IN AL2014 USING END MILLING UNDER DRY AND WET CONDITIONS. International Journal of Advance Research and Innovative Ideas In Education, 4(2), 1728-1742.

MLA Style

PRAKASH, S.RAM SURYA, et al. "ANALYSIS AND OPTIMISATION OF SURFACE ROUGHNESS IN AL2014 USING END MILLING UNDER DRY AND WET CONDITIONS." International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 2, 2018, pp. 1728-1742.

IEEE Style

S.RAM SURYA PRAKASH, R.V.RISHI REVANTH, P.PALANIKUMAR, and V.MUGUNDAN, "ANALYSIS AND OPTIMISATION OF SURFACE ROUGHNESS IN AL2014 USING END MILLING UNDER DRY AND WET CONDITIONS," International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 2, pp. 1728-1742, 2018.

Vancouver Style

PRAKASH S.RAM SURYA, REVANTH R.V.RISHI, P.PALANIKUMAR, V.MUGUNDAN. ANALYSIS AND OPTIMISATION OF SURFACE ROUGHNESS IN AL2014 USING END MILLING UNDER DRY AND WET CONDITIONS. International Journal of Advance Research and Innovative Ideas In Education. 2018;4(2):1728-1742.

Harvard Style

PRAKASH, S.RAM SURYA, REVANTH, R.V.RISHI, P.PALANIKUMAR, & V.MUGUNDAN (2018) 'ANALYSIS AND OPTIMISATION OF SURFACE ROUGHNESS IN AL2014 USING END MILLING UNDER DRY AND WET CONDITIONS', International Journal of Advance Research and Innovative Ideas In Education, 4(2), pp. 1728-1742.

Chicago Style

PRAKASH, S.RAM SURYA, et al. "ANALYSIS AND OPTIMISATION OF SURFACE ROUGHNESS IN AL2014 USING END MILLING UNDER DRY AND WET CONDITIONS." International Journal of Advance Research and Innovative Ideas In Education 4, no. 2 (2018): 1728-1742.

Turabian Style

PRAKASH, S.RAM SURYA, et al. "ANALYSIS AND OPTIMISATION OF SURFACE ROUGHNESS IN AL2014 USING END MILLING UNDER DRY AND WET CONDITIONS." International Journal of Advance Research and Innovative Ideas In Education 4, no. 2 (2018): 1728-1742.