FRICTION STIR WELDING PARAMETER OPTIMIZATION USING OPTIMIZATION PROCESS

Gaurav Tatpurkar; Mahesh Sangale; Sumit Pagare; Sudhir Sanap; Amit Karwande

FRICTION STIR WELDING PARAMETER OPTIMIZATION USING OPTIMIZATION PROCESS

April 2018

Vol-4, Issue-2

Paper ID: 7844

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

MECHANICAL ENGINEERING

Keywords

Friction Stir Welding (FSW) AZ31 AZ91 microstructural analysis

Abstract

The focus of the project work will be concentrated in the mechanical performance and the stir zone microstructure by FSW butt welded part having 150mm × 50mm × 5mm thick sheet 5000 series aluminum alloy 6061 and 150mm × 50mm × 5mm thick The same sheet using tool steel material having taper tool pin profile. And same specimen plates having size (150mm × 50mm × 5mm) welded by Oxyacetylene welding process. All the testing of welded part will be tested by ASTM standard. In this work, (UTM), Inverted Microscope (IM) to get the microstructure properties.

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	Gaurav Tatpurkar	SND COLLEGE OF ENGINEERING AND RESEARCH CENTER,YEOLA
2	Mahesh Sangale	SND COLLEGE OF ENGINEERING AND RESEARCH CENTER,YEOLA
3	Sumit Pagare	SND COLLEGE OF ENGINEERING AND RESEARCH CENTER,YEOLA
4	Sudhir Sanap	SND COLLEGE OF ENGINEERING AND RESEARCH CENTER,YEOLA
5	Amit Karwande	SND COLLEGE OF ENGINEERING AND RESEARCH CENTER,YEOLA

How to Cite

Use the following formats to cite this article in your research.

APA Style

Tatpurkar, Gaurav, Sangale, Mahesh, Pagare, Sumit, Sanap, Sudhir, & Karwande, Amit (2018). FRICTION STIR WELDING PARAMETER OPTIMIZATION USING OPTIMIZATION PROCESS. International Journal of Advance Research and Innovative Ideas In Education, 4(2), 2764-2771.

MLA Style

Tatpurkar, Gaurav, et al. "FRICTION STIR WELDING PARAMETER OPTIMIZATION USING OPTIMIZATION PROCESS." International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 2, 2018, pp. 2764-2771.

IEEE Style

Gaurav Tatpurkar, Mahesh Sangale, Sumit Pagare, Sudhir Sanap, and Amit Karwande, "FRICTION STIR WELDING PARAMETER OPTIMIZATION USING OPTIMIZATION PROCESS," International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 2, pp. 2764-2771, 2018.

Vancouver Style

Tatpurkar Gaurav, Sangale Mahesh, Pagare Sumit, Sanap Sudhir, Karwande Amit. FRICTION STIR WELDING PARAMETER OPTIMIZATION USING OPTIMIZATION PROCESS. International Journal of Advance Research and Innovative Ideas In Education. 2018;4(2):2764-2771.

Harvard Style

Tatpurkar, Gaurav, Sangale, Mahesh, Pagare, Sumit, Sanap, Sudhir, & Karwande, Amit (2018) 'FRICTION STIR WELDING PARAMETER OPTIMIZATION USING OPTIMIZATION PROCESS', International Journal of Advance Research and Innovative Ideas In Education, 4(2), pp. 2764-2771.

Chicago Style

Tatpurkar, Gaurav, et al. "FRICTION STIR WELDING PARAMETER OPTIMIZATION USING OPTIMIZATION PROCESS." International Journal of Advance Research and Innovative Ideas In Education 4, no. 2 (2018): 2764-2771.

Turabian Style

Tatpurkar, Gaurav, et al. "FRICTION STIR WELDING PARAMETER OPTIMIZATION USING OPTIMIZATION PROCESS." International Journal of Advance Research and Innovative Ideas In Education 4, no. 2 (2018): 2764-2771.