OPTIMIZATION OF PROCESS PARAMETER IN ABRASIVE WATER JET MACHINING (AWJM).

Mechanical

Abrasive Water Jet Machining (AWJM) is the non-conventional material removal process. It is an effective machining process for processing a variety of hard and brittle material. It has various advantages over the other non-conventional cutting process like high machining versatility, minimum stresses on the work piece, high flexibility no thermal distortion, and small cutting forces. Abrasive Water Jet Machining (AWJM) removes material through the action of focused beam of abrasive jet directed at the work piece the resulting erosion can be used for cutting, drilling etc. For this experimental work type of abrasive particles commonly used is Al Oxide, Garrnet. Here the machining parameters will Traverse Speed, Abrasive Flow Rate and Stand of Distance. This work includes that creation and analyzing of response surface. From this paper the overall performance of parameters on metal removal rate (MRR) & surface roughness (SR) of work piece with statistically investigate by Taguchi Design.GRA will use for Optimize the Values.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.