REDESIGN AND MODIFICATION OF TRICYCLE FOR PHYSICALLY HANDICAPPED PERSON

March 2018
Vol-4, Issue-2
Paper ID: 7547
ISSN: 2395-4396
Downloads: 0

Abstract & Details

Research Area
Mechanical Engineering
Keywords
slider crank mechanism permanent magnet DC motor handicapped person battery environmental friendly.
Abstract
The project involve slider crank mechanism as well as the permanent magnet DC motor. The slider crank mechanism is connected to the one of the rear wheel of tricycle and the permanent magnet DC motor is attached to the front wheel with the help of chain and sprocket mechanism. We are connecting slider crank mechanism only at one wheel of the tricycle (rear wheel), because it is helpful during turning it act as a differential. The permanent magnet DC motor is run with the help of battery source and the battery is charge by AC supply. This type of tricycle is very useful for handicapped person who is economically poor. And is environmental friendly because it doesn’t contribute in pollution.

Author Information

# Name Institute / Affiliation
1 Nayan A Khadase Datta Meghe Institute Of Engineering Technology And Research
2 Pravin B Mandawakar Datta Meghe Institute Of Engineering Technology And Research
3 Vickky A. Pise Datta Meghe Institute Of Engineering Technology And Research
4 Akshay L Tiple Datta Meghe Institute Of Engineering Technology And Research
5 Bharat P. Ganjudde Datta Meghe Institute Of Engineering Technology And Research
6 Akshay V. Telrandhe Datta Meghe Institute Of Engineering Technology And Research
7 Amol D. Umate Datta Meghe Institute Of Engineering Technology And Research

How to Cite

Use the following formats to cite this article in your research.

APA Style
Khadase, Nayan A, Mandawakar, Pravin B, Pise, Vickky A., Tiple, Akshay L, Ganjudde, Bharat P., Telrandhe, Akshay V., & Umate, Amol D. (2018). REDESIGN AND MODIFICATION OF TRICYCLE FOR PHYSICALLY HANDICAPPED PERSON. International Journal of Advance Research and Innovative Ideas In Education, 4(2), 398-402.
MLA Style
Khadase, Nayan A, et al. "REDESIGN AND MODIFICATION OF TRICYCLE FOR PHYSICALLY HANDICAPPED PERSON." International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 2, 2018, pp. 398-402.
IEEE Style
Nayan A Khadase, Pravin B Mandawakar, Vickky A. Pise, Akshay L Tiple, Bharat P. Ganjudde, Akshay V. Telrandhe, and Amol D. Umate, "REDESIGN AND MODIFICATION OF TRICYCLE FOR PHYSICALLY HANDICAPPED PERSON," International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 2, pp. 398-402, 2018.
Vancouver Style
Khadase Nayan A, Mandawakar Pravin B, Pise Vickky A., Tiple Akshay L, Ganjudde Bharat P., Telrandhe Akshay V., et al. REDESIGN AND MODIFICATION OF TRICYCLE FOR PHYSICALLY HANDICAPPED PERSON. International Journal of Advance Research and Innovative Ideas In Education. 2018;4(2):398-402.
Harvard Style
Khadase, Nayan A, Mandawakar, Pravin B, Pise, Vickky A., Tiple, Akshay L, Ganjudde, Bharat P., Telrandhe, Akshay V., & Umate, Amol D. (2018) 'REDESIGN AND MODIFICATION OF TRICYCLE FOR PHYSICALLY HANDICAPPED PERSON', International Journal of Advance Research and Innovative Ideas In Education, 4(2), pp. 398-402.
Chicago Style
Khadase, Nayan A, et al. "REDESIGN AND MODIFICATION OF TRICYCLE FOR PHYSICALLY HANDICAPPED PERSON." International Journal of Advance Research and Innovative Ideas In Education 4, no. 2 (2018): 398-402.
Turabian Style
Khadase, Nayan A, et al. "REDESIGN AND MODIFICATION OF TRICYCLE FOR PHYSICALLY HANDICAPPED PERSON." International Journal of Advance Research and Innovative Ideas In Education 4, no. 2 (2018): 398-402.

Export Citation

Related Research

Recent Trends in Optimization of Process Parameters of TIG Welding Joints
Saurabh Gandhe 2026 Mechanican Engineering
PDF Unavailable
Designing And Manufacturing Of Mecanum Wheel
Pradyot Tajne et al. 2026 Engineering
PDF Unavailable
DESIGN AND FABRICATION OF PADDY DRYING SYSTEM WITH CONTROLLED AIR CIRCULATION
LAKAVATH VINAY et al. 2026 MECHANICAL ENGINEERING
PDF Unavailable
Experimental, Design and Development of different punch and die for head light reflectors
Amrut Chandanshive et al. 2026 Mechanical Engineering
PDF Unavailable
Experimental Analysis of Aluminium Hybrid Material using Analytical and Experimental Method
Prathmesh Shinde et al. 2026 Mechanical Engineering
PDF Unavailable
Effect of Slight Pitch Difference on the Fatigue Life of Bolt
Aslam Sheikh et al. 2026 Mechanical Engineering
PDF Unavailable
Stress Concentration Analysis of Cut out Orientation of Plates by Finite Element Analysis
Mahesh Arun Dhole et al. 2026 Mechanical Engineering
PDF Unavailable
Reduction of the Weight of Air Conditioning by Static and Model Analysis
Aditya Pawar et al. 2026 Mechanical Engineering
PDF Unavailable
Design and analysis of Tractor trolley rear axle for Weight reduction
Akshay Kharat et al. 2026 Mechanical Engineering
PDF Unavailable