A REVIEW-PARAMETRIC OPTIMIZATION OF WIRE CUT ELECTRO DISCHARGE MACHINING PROCESS FOR SURFACE FINISH, MRR AND KERF WIDTH FOR H-31 TOOLS STEEL

DHAMAT PUNAMBEN D; JITENDRA PRAJAPATI

A REVIEW-PARAMETRIC OPTIMIZATION OF WIRE CUT ELECTRO DISCHARGE MACHINING PROCESS FOR SURFACE FINISH, MRR AND KERF WIDTH FOR H-31 TOOLS STEEL

April 2017

Vol-3, Issue-2

Paper ID: 4834

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

MECHANICAL ENGINERING

Keywords

COMPUTER AIDED MANUFACTURING

Abstract

Wire electrical discharge machining (WEDM) allowed success in the production of newer materials, especially for the aerospace and medical industries. This process employed for the parts demanding higher accuracy levels with varying hardness or complex shapes. The main objectives of this study investigate and evaluate the effect of different input process parameters (pulse on time, pulse off time, servo voltage) on material removal rate, kerf width and surface roughness as response parameters have been considered for Each Experiment. Rey relational analyses are applied to determine the suitable selection of machining parameters for wire cut EDM process. A grey relational grade obtained from the grey relational analysis is used to optimize the process parameters. By analyzing the Grey relational grade we find the optimum parameters. Confirmation test has been conducted to validate the optimized parameter.

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	DHAMAT PUNAMBEN D	HasmukhGoswami College of Engineering,Vahelal, Ahmedabad-Gujarat
2	JITENDRA PRAJAPATI	HasmukhGoswami College of Engineering,Vahelal, Ahmedabad-Gujarat

How to Cite

Use the following formats to cite this article in your research.

APA Style

D, DHAMAT PUNAMBEN & PRAJAPATI, JITENDRA (2017). A REVIEW-PARAMETRIC OPTIMIZATION OF WIRE CUT ELECTRO DISCHARGE MACHINING PROCESS FOR SURFACE FINISH, MRR AND KERF WIDTH FOR H-31 TOOLS STEEL. International Journal of Advance Research and Innovative Ideas In Education, 3(2), 4321-4329.

MLA Style

D, DHAMAT PUNAMBEN, and JITENDRA PRAJAPATI. "A REVIEW-PARAMETRIC OPTIMIZATION OF WIRE CUT ELECTRO DISCHARGE MACHINING PROCESS FOR SURFACE FINISH, MRR AND KERF WIDTH FOR H-31 TOOLS STEEL." International Journal of Advance Research and Innovative Ideas In Education, vol. 3, no. 2, 2017, pp. 4321-4329.

IEEE Style

DHAMAT PUNAMBEN D and JITENDRA PRAJAPATI, "A REVIEW-PARAMETRIC OPTIMIZATION OF WIRE CUT ELECTRO DISCHARGE MACHINING PROCESS FOR SURFACE FINISH, MRR AND KERF WIDTH FOR H-31 TOOLS STEEL," International Journal of Advance Research and Innovative Ideas In Education, vol. 3, no. 2, pp. 4321-4329, 2017.

Vancouver Style

D DHAMAT PUNAMBEN, PRAJAPATI JITENDRA. A REVIEW-PARAMETRIC OPTIMIZATION OF WIRE CUT ELECTRO DISCHARGE MACHINING PROCESS FOR SURFACE FINISH, MRR AND KERF WIDTH FOR H-31 TOOLS STEEL. International Journal of Advance Research and Innovative Ideas In Education. 2017;3(2):4321-4329.

Harvard Style

D, DHAMAT PUNAMBEN & PRAJAPATI, JITENDRA (2017) 'A REVIEW-PARAMETRIC OPTIMIZATION OF WIRE CUT ELECTRO DISCHARGE MACHINING PROCESS FOR SURFACE FINISH, MRR AND KERF WIDTH FOR H-31 TOOLS STEEL', International Journal of Advance Research and Innovative Ideas In Education, 3(2), pp. 4321-4329.

Chicago Style

D, DHAMAT PUNAMBEN and JITENDRA PRAJAPATI. "A REVIEW-PARAMETRIC OPTIMIZATION OF WIRE CUT ELECTRO DISCHARGE MACHINING PROCESS FOR SURFACE FINISH, MRR AND KERF WIDTH FOR H-31 TOOLS STEEL." International Journal of Advance Research and Innovative Ideas In Education 3, no. 2 (2017): 4321-4329.

Turabian Style

D, DHAMAT PUNAMBEN and JITENDRA PRAJAPATI. "A REVIEW-PARAMETRIC OPTIMIZATION OF WIRE CUT ELECTRO DISCHARGE MACHINING PROCESS FOR SURFACE FINISH, MRR AND KERF WIDTH FOR H-31 TOOLS STEEL." International Journal of Advance Research and Innovative Ideas In Education 3, no. 2 (2017): 4321-4329.