PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING TURNING OF INCONEL-625

LALITBHAI PATEL; PRITESH PRAJAPATI

PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING TURNING OF INCONEL-625

April 2017

Vol-3, Issue-2

Paper ID: 4799

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

MECHANICAL ENGINEERING

Keywords

Hard Turning Surface roughness MRR Temperature cutting force Optimization

Abstract

In this thesis the results of an experimental investigation about the effect on Inconel-625 during hard turning using cubic boron nitride (CBN) based ceramic cutting tool. Turning experiments were carried out at different cutting speeds, feed rates and depth of cut .Tool performance was evaluated with respect to temperature, cutting forces, surface roughness and material removal rate generated during turning. The effect of cutting speed, depth of cut and feed rate on temperature, cutting forces, surface roughness and material removal rate during hard turning of Inconel-625 was experimented and analyzed by using taguchi method. The orthogonal array used for optimization. Than optimize the temperature, cutting forces, surface roughness and material removal rate using analysis of variance (ANOVA) Regression and Grey Relational Analysis (GRA) method

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	LALITBHAI PATEL	KALOL INSTITUTE OF TECHNOLOGY & RESEARCH CENTRE KALOL
2	PRITESH PRAJAPATI	KALOL INSTITUTE OF TECHNOLOGY & RESEARCH CENTRE KALOL

How to Cite

Use the following formats to cite this article in your research.

APA Style

PATEL, LALITBHAI & PRAJAPATI, PRITESH (2017). PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING TURNING OF INCONEL-625. International Journal of Advance Research and Innovative Ideas In Education, 3(2), 4462-4472.

MLA Style

PATEL, LALITBHAI, and PRITESH PRAJAPATI. "PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING TURNING OF INCONEL-625." International Journal of Advance Research and Innovative Ideas In Education, vol. 3, no. 2, 2017, pp. 4462-4472.

IEEE Style

LALITBHAI PATEL and PRITESH PRAJAPATI, "PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING TURNING OF INCONEL-625," International Journal of Advance Research and Innovative Ideas In Education, vol. 3, no. 2, pp. 4462-4472, 2017.

Vancouver Style

PATEL LALITBHAI, PRAJAPATI PRITESH. PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING TURNING OF INCONEL-625. International Journal of Advance Research and Innovative Ideas In Education. 2017;3(2):4462-4472.

Harvard Style

PATEL, LALITBHAI & PRAJAPATI, PRITESH (2017) 'PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING TURNING OF INCONEL-625', International Journal of Advance Research and Innovative Ideas In Education, 3(2), pp. 4462-4472.

Chicago Style

PATEL, LALITBHAI and PRITESH PRAJAPATI. "PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING TURNING OF INCONEL-625." International Journal of Advance Research and Innovative Ideas In Education 3, no. 2 (2017): 4462-4472.

Turabian Style

PATEL, LALITBHAI and PRITESH PRAJAPATI. "PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING TURNING OF INCONEL-625." International Journal of Advance Research and Innovative Ideas In Education 3, no. 2 (2017): 4462-4472.