“Design and Analysis of Injection Mould for Submarine Engine Part (MAD-7503)”

Mr. Narwade V. B.; Mr. Mate A.K.; Mr. Vharkate C.B.; Mr. Kale M.L.; Mr. Rathod N.R.; Mr. Jagtap P.V.; Mr. Rayate M.N.

“Design and Analysis of Injection Mould for Submarine Engine Part (MAD-7503)”

February 2017

Vol-3, Issue-1

Paper ID: 3778

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

Mechanical Engineering

Keywords

stroke mould design Optimization in design and manufacturing Increase productivity Raw material Single

Abstract

Since few years ago molding process is quite difficult and time taking process. At first Drawing board and then 2D software were used after which patterns were made. But suitable result never gets most of time. So that cost of molding increases and time require for design is more. Due to the technological advancement the process of Mold Design has fastened and also the results are convincing. By using 3D software can create Parametric Design, Which is editable.

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	Mr. Narwade V. B.	Aditya Engineering College, Beed
2	Mr. Mate A.K.	Aditya polytechnic College, Beed
3	Mr. Vharkate C.B.	Aditya Polytechnic College, Beed
4	Mr. Kale M.L.	M.S. polytechnic College, Beed
5	Mr. Rathod N.R.	Aditya Engineering College, Beed
6	Mr. Jagtap P.V.	Aditya Engineering College, Beed
7	Mr. Rayate M.N.	govt. polytechnic College, Beed

How to Cite

Use the following formats to cite this article in your research.

APA Style

B., Mr. Narwade V., A.K., Mr. Mate, C.B., Mr. Vharkate, M.L., Mr. Kale, N.R., Mr. Rathod, P.V., Mr. Jagtap, & M.N., Mr. Rayate (2017). “Design and Analysis of Injection Mould for Submarine Engine Part (MAD-7503)”. International Journal of Advance Research and Innovative Ideas In Education, 3(1), 974-954.

MLA Style

B., Mr. Narwade V., et al. "“Design and Analysis of Injection Mould for Submarine Engine Part (MAD-7503)”." International Journal of Advance Research and Innovative Ideas In Education, vol. 3, no. 1, 2017, pp. 974-954.

IEEE Style

Mr. Narwade V. B., Mr. Mate A.K., Mr. Vharkate C.B., Mr. Kale M.L., Mr. Rathod N.R., Mr. Jagtap P.V., and Mr. Rayate M.N., "“Design and Analysis of Injection Mould for Submarine Engine Part (MAD-7503)”," International Journal of Advance Research and Innovative Ideas In Education, vol. 3, no. 1, pp. 974-954, 2017.

Vancouver Style

B. Mr. Narwade V., A.K. Mr. Mate, C.B. Mr. Vharkate, M.L. Mr. Kale, N.R. Mr. Rathod, P.V. Mr. Jagtap, et al. “Design and Analysis of Injection Mould for Submarine Engine Part (MAD-7503)”. International Journal of Advance Research and Innovative Ideas In Education. 2017;3(1):974-954.

Harvard Style

B., Mr. Narwade V., A.K., Mr. Mate, C.B., Mr. Vharkate, M.L., Mr. Kale, N.R., Mr. Rathod, P.V., Mr. Jagtap, & M.N., Mr. Rayate (2017) '“Design and Analysis of Injection Mould for Submarine Engine Part (MAD-7503)”', International Journal of Advance Research and Innovative Ideas In Education, 3(1), pp. 974-954.

Chicago Style

B., Mr. Narwade V., et al. "“Design and Analysis of Injection Mould for Submarine Engine Part (MAD-7503)”." International Journal of Advance Research and Innovative Ideas In Education 3, no. 1 (2017): 974-954.

Turabian Style

B., Mr. Narwade V., et al. "“Design and Analysis of Injection Mould for Submarine Engine Part (MAD-7503)”." International Journal of Advance Research and Innovative Ideas In Education 3, no. 1 (2017): 974-954.