Numerical Controlled Dressing Attachment For Grinding Of Feed Drum

Mr.Swapnil Milind Yenpure; Mr. Rhishikesh B. Vyavahare; Mr.Ashish N. Shinde; Ms.Sharda M. Vaidya

Numerical Controlled Dressing Attachment For Grinding Of Feed Drum

June 2016

Vol-2, Issue-3

Paper ID: 2802

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

Mechanical Engineering

Keywords

Grinding topography detrimental dressing truing conditioning abrasive grains profiling resin abrasive wheels productivity profile tool.

Abstract

During the abrasive cutting process the grinding wheel is subject to wear and to clogging up. As a consequence, the defined cutting topography, which is made up of abrasive grains and bonding material, gradually changes for the worse with possible severely detrimental effects on the grinding result (work piece quality, increased forces, etc.) To maintain work piece quality and cutting performance, it is of paramount importance to maintain this defined cutting topography by repeated dressing and to make the best use of the potential tool life of a given grinding wheel. As there is some confusion concerning dressing terminology, a few clarifying definitions are in order. Generally, all processes which serve to regenerate the cutting ability of a grinding wheel are called “dressing””. Dressing includes the terms “truing” and “conditioning”. However and unfortunately, these different terms are sometimes used interchangeably. “Truing” primarily means to create a perfectly round and true running grinding wheel, and it can also mean giving the wheel a particular profile. Therefore, “truing” is often used as just meaning “profiling”. “Conditioning”, strictly speaking refers to the removing of bond from around the abrasive grains, mostly referred to in the context of resin bonded super abrasive wheels. Dressing must be seen as an integral part of the grinding process; it increases productivity and quality when targeted and applied in the correct way. Preconditions that must be met are that the dressing results are reproducible and the wear of dressing tools predictable and controllable.

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	Mr.Swapnil Milind Yenpure	G.S Moze College of Engineering, Balewadi, Pune-411045
2	Mr. Rhishikesh B. Vyavahare	G.S Moze College of Engineering, Balewadi, Pune-411045
3	Mr.Ashish N. Shinde	G.S Moze College of Engineering, Balewadi, Pune-411045
4	Ms.Sharda M. Vaidya	G.S Moze College of Engineering, Balewadi, Pune-411045

How to Cite

Use the following formats to cite this article in your research.

APA Style

Yenpure, Mr.Swapnil Milind, Vyavahare, Mr. Rhishikesh B., Shinde, Mr.Ashish N., & Vaidya, Ms.Sharda M. (2016). Numerical Controlled Dressing Attachment For Grinding Of Feed Drum. International Journal of Advance Research and Innovative Ideas In Education, 2(3), 4450-4458.

MLA Style

Yenpure, Mr.Swapnil Milind, et al. "Numerical Controlled Dressing Attachment For Grinding Of Feed Drum." International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 3, 2016, pp. 4450-4458.

IEEE Style

Mr.Swapnil Milind Yenpure, Mr. Rhishikesh B. Vyavahare, Mr.Ashish N. Shinde, and Ms.Sharda M. Vaidya, "Numerical Controlled Dressing Attachment For Grinding Of Feed Drum," International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 3, pp. 4450-4458, 2016.

Vancouver Style

Yenpure Mr.Swapnil Milind, Vyavahare Mr. Rhishikesh B., Shinde Mr.Ashish N., Vaidya Ms.Sharda M.. Numerical Controlled Dressing Attachment For Grinding Of Feed Drum. International Journal of Advance Research and Innovative Ideas In Education. 2016;2(3):4450-4458.

Harvard Style

Yenpure, Mr.Swapnil Milind, Vyavahare, Mr. Rhishikesh B., Shinde, Mr.Ashish N., & Vaidya, Ms.Sharda M. (2016) 'Numerical Controlled Dressing Attachment For Grinding Of Feed Drum', International Journal of Advance Research and Innovative Ideas In Education, 2(3), pp. 4450-4458.

Chicago Style

Yenpure, Mr.Swapnil Milind, et al. "Numerical Controlled Dressing Attachment For Grinding Of Feed Drum." International Journal of Advance Research and Innovative Ideas In Education 2, no. 3 (2016): 4450-4458.

Turabian Style

Yenpure, Mr.Swapnil Milind, et al. "Numerical Controlled Dressing Attachment For Grinding Of Feed Drum." International Journal of Advance Research and Innovative Ideas In Education 2, no. 3 (2016): 4450-4458.