Fabrication Of Air Brake System Using Engine Exhaust Gas
Abstract & Details
Research Area
Mechanical Engineering
Keywords
Dynamo
DC Compressor
and Pressure relief valve etc….
Abstract
The aim is to design and to develop an air brake system based on exhaust gas is called “fabrication of
air brake system using engine exhaust gas”. The main aim of this project is to reduce the workloads of the engine
drive to operate the air compressor, because here the compressor is not operated by the engine drive.
Here we are placing a turbine in the path of exhaust from the engine. The turbine is connected to a
dynamo by means of coupling, which is used to generate power. Depending upon the airflow the turbine will start
rotating, and then the dynamo will also starts to rotate. A dynamo is a device which is used to convert the kinetic
energy into electrical energy. The generated power can be stored in the battery and then this electric power has
loaded to the D.C compressor. The air compressor compresses the atmospheric air and it stored in the air tank and
the air tank has pressure relief valve to control the pressure in the tank. The air tank supplies the compressed
pneumatic power to the pneumatic actuator through solenoid valve to apply brake. The pneumatic actuator is a
double acting cylinder which converts hydraulic energy into linear motion.
License
This work is licensed under a Creative
Commons
Attribution-ShareAlike 4.0 International License.
Author Information
| # | Name | Institute / Affiliation |
|---|---|---|
| 1 | Prakash T | Vidyaa Vikas College of Engineering and Technology |
| 2 | Gowtham.L | Vidyaa Vikas College of Engineering and Technology |
| 3 | Krishnasamy.S | Vidyaa Vikas College of Engineering and Technology |
| 4 | Naveen Kumar.S | Vidyaa Vikas College of Engineering and Technology |
| 5 | Nivethan.V | Vidyaa Vikas College of Engineering and Technology |
How to Cite
Use the following formats to cite this article in your research.
APA Style
T, Prakash, Gowtham.L, Krishnasamy.S, Kumar.S, Naveen, & Nivethan.V (2016). Fabrication Of Air Brake System Using Engine Exhaust Gas. International Journal of Advance Research and Innovative Ideas In Education, 2(3), 305-308.
MLA Style
T, Prakash, et al. "Fabrication Of Air Brake System Using Engine Exhaust Gas." International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 3, 2016, pp. 305-308.
IEEE Style
Prakash T, Gowtham.L, Krishnasamy.S, Naveen Kumar.S, and Nivethan.V, "Fabrication Of Air Brake System Using Engine Exhaust Gas," International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 3, pp. 305-308, 2016.
Vancouver Style
T Prakash, Gowtham.L, Krishnasamy.S, Kumar.S Naveen, Nivethan.V. Fabrication Of Air Brake System Using Engine Exhaust Gas. International Journal of Advance Research and Innovative Ideas In Education. 2016;2(3):305-308.
Harvard Style
T, Prakash, Gowtham.L, Krishnasamy.S, Kumar.S, Naveen, & Nivethan.V (2016) 'Fabrication Of Air Brake System Using Engine Exhaust Gas', International Journal of Advance Research and Innovative Ideas In Education, 2(3), pp. 305-308.
Chicago Style
T, Prakash, et al. "Fabrication Of Air Brake System Using Engine Exhaust Gas." International Journal of Advance Research and Innovative Ideas In Education 2, no. 3 (2016): 305-308.
Turabian Style
T, Prakash, et al. "Fabrication Of Air Brake System Using Engine Exhaust Gas." International Journal of Advance Research and Innovative Ideas In Education 2, no. 3 (2016): 305-308.
Related Research
Designing And Manufacturing Of Mecanum Wheel
PDF Unavailable
Experimental, Design and Development of different punch and die for head light reflectors
PDF Unavailable
Experimental Analysis of Aluminium Hybrid Material using Analytical and Experimental Method
PDF Unavailable
Effect of Slight Pitch Difference on the Fatigue Life of Bolt
PDF Unavailable