THE EVALUATION OF VAPOUR COMPRESSION REFRIGERATION SYSTEM

June 2023
Vol-9, Issue-3
Paper ID: 20802
ISSN: 2395-4396
Downloads: 0

Abstract & Details

Research Area
MECHANICAL ENGINEERING
Keywords
Abstract A discription of the Refrigeration System Need for the project objective working theory Fabrication process Experiential setup Observations and calculations Results and discussions conclusion and References.
Abstract
This project looked into and reported on the impact of throttling variation on the operation of a vapour compression refrigeration system employing R134a refrigerant as the working fluid. Under conditions of room temperature of 29 to 32°C, the experiment was conducted using a refrigeration test rig with a capillary line acting as a throttling device that was divided into three capillary lines of equal length. The test rig has instruments fitted at the condensing and evaporating units' intake and outlet to measure the pressure and temperature of the working fluid. The pressure temperature data were taken during experimental tests when one, two, and all three capillary lines were used for the throttling procedure. Based on the experimental data, the performance of the refrigeration system was examined. The temperature differential between the evaporating unit's input and outlet increased, refrigerating impact increased, and compressor work decreased as the number of capillary lines used increased from one to three, according to the results. If only one or two capillary lines were used, respectively, for the throttling process, it was discovered that the system's coefficient of performance increased more than its COP. enhancing the system's efficiency.

Author Information

# Name Institute / Affiliation
1 BANTU VASU RAGHU ENGINEERING COLLEGE
2 A.CHAKRADHAR RAGHU ENGINEERING COLLEGE
3 K.HARI VAMSI RAGHU ENGINEERING COLLEGE
4 L.PAVAN KUMAR RAGHU ENGINEERING COLLEGE
5 N.SRAVAN KUMAR RAGHU ENGINEERING COLLEGE

How to Cite

Use the following formats to cite this article in your research.

APA Style
VASU, BANTU, A.CHAKRADHAR, VAMSI, K.HARI, KUMAR, L.PAVAN, & KUMAR, N.SRAVAN (2023). THE EVALUATION OF VAPOUR COMPRESSION REFRIGERATION SYSTEM. International Journal of Advance Research and Innovative Ideas In Education, 9(3), 4051-4056.
MLA Style
VASU, BANTU, et al. "THE EVALUATION OF VAPOUR COMPRESSION REFRIGERATION SYSTEM." International Journal of Advance Research and Innovative Ideas In Education, vol. 9, no. 3, 2023, pp. 4051-4056.
IEEE Style
BANTU VASU, A.CHAKRADHAR, K.HARI VAMSI, L.PAVAN KUMAR, and N.SRAVAN KUMAR, "THE EVALUATION OF VAPOUR COMPRESSION REFRIGERATION SYSTEM," International Journal of Advance Research and Innovative Ideas In Education, vol. 9, no. 3, pp. 4051-4056, 2023.
Vancouver Style
VASU BANTU, A.CHAKRADHAR, VAMSI K.HARI, KUMAR L.PAVAN, KUMAR N.SRAVAN. THE EVALUATION OF VAPOUR COMPRESSION REFRIGERATION SYSTEM. International Journal of Advance Research and Innovative Ideas In Education. 2023;9(3):4051-4056.
Harvard Style
VASU, BANTU, A.CHAKRADHAR, VAMSI, K.HARI, KUMAR, L.PAVAN, & KUMAR, N.SRAVAN (2023) 'THE EVALUATION OF VAPOUR COMPRESSION REFRIGERATION SYSTEM', International Journal of Advance Research and Innovative Ideas In Education, 9(3), pp. 4051-4056.
Chicago Style
VASU, BANTU, et al. "THE EVALUATION OF VAPOUR COMPRESSION REFRIGERATION SYSTEM." International Journal of Advance Research and Innovative Ideas In Education 9, no. 3 (2023): 4051-4056.
Turabian Style
VASU, BANTU, et al. "THE EVALUATION OF VAPOUR COMPRESSION REFRIGERATION SYSTEM." International Journal of Advance Research and Innovative Ideas In Education 9, no. 3 (2023): 4051-4056.

Export Citation

Related Research

Recent Trends in Optimization of Process Parameters of TIG Welding Joints
Saurabh Gandhe 2026 Mechanican Engineering
PDF Unavailable
Designing And Manufacturing Of Mecanum Wheel
Pradyot Tajne et al. 2026 Engineering
PDF Unavailable
DESIGN AND FABRICATION OF PADDY DRYING SYSTEM WITH CONTROLLED AIR CIRCULATION
LAKAVATH VINAY et al. 2026 MECHANICAL ENGINEERING
PDF Unavailable
Experimental, Design and Development of different punch and die for head light reflectors
Amrut Chandanshive et al. 2026 Mechanical Engineering
PDF Unavailable
Experimental Analysis of Aluminium Hybrid Material using Analytical and Experimental Method
Prathmesh Shinde et al. 2026 Mechanical Engineering
PDF Unavailable
Effect of Slight Pitch Difference on the Fatigue Life of Bolt
Aslam Sheikh et al. 2026 Mechanical Engineering
PDF Unavailable
Stress Concentration Analysis of Cut out Orientation of Plates by Finite Element Analysis
Mahesh Arun Dhole et al. 2026 Mechanical Engineering
PDF Unavailable
Reduction of the Weight of Air Conditioning by Static and Model Analysis
Aditya Pawar et al. 2026 Mechanical Engineering
PDF Unavailable
Design and analysis of Tractor trolley rear axle for Weight reduction
Akshay Kharat et al. 2026 Mechanical Engineering
PDF Unavailable