Modification of Two Wheeler to Run on LPG Fuel

February 2022
Vol-8, Issue-1
Paper ID: 16071
ISSN: 2395-4396
Downloads: 0

Abstract & Details

Research Area
Mechanical Engineering
Keywords
Alternative fuel LPG Scooter Gas kit Non-Conventional fuel.
Abstract
Day by day increasing pollution and the high cost of fossil fuels have made us think of alternative fuels. Liquefied Petroleum Gas (LPG) is one of the most popular alternative fuels for automobiles because of its various features over gasoline fuel such as high octane number, low emission rate, etc. To investigate the feasibility of LPG as an alternative fuel for automobiles, here a two-wheeler (scooter) case is studied since the usage of the scooter is more nowadays for personal transportation. The required change in the physical structure of a two-wheeler running on Petrol is discussed for LPG. Scooters (two-wheelers) play a significant role in the day to day transportation. Gaseous fuels such as liquefied petroleum gas (LPG) and compressed natural gas (CNG) have been broadly used in commercial vehicles. An effort has been made to use non-conventional fuel against conventional fuel which is becoming scarce and costly these days, as nonconventional fuel will lead to less polluted air than conventional fuel. It is also worthy of economic considerations and engine efficiency. In our paper, we have installed an LPG gas kit on a four-stroke vehicle in which we can use both gasoline and LPG as fuel. The alterations are made to install LPG in the vehicle & its effects are studied & discussed.

Author Information

# Name Institute / Affiliation
1 Prof. Swapnil H. Kondo Guru Gobind Singh College of Engineering and Research Center, Nashik.
2 Ujjwal S. Diwane Guru Gobind Singh College of Engineering and Research Center, Nashik.
3 Lalit S. Deore Guru Gobind Singh College of Engineering and Research Center, Nashik.
4 Akshay A. Daund Guru Gobind Singh College of Engineering and Research Center, Nashik.
5 Piyush R. Adhangale Guru Gobind Singh College of Engineering and Research Center, Nashik.

How to Cite

Use the following formats to cite this article in your research.

APA Style
Kondo, Prof. Swapnil H., Diwane, Ujjwal S., Deore, Lalit S., Daund, Akshay A., & Adhangale, Piyush R. (2022). Modification of Two Wheeler to Run on LPG Fuel. International Journal of Advance Research and Innovative Ideas In Education, 8(1), 1392-1397.
MLA Style
Kondo, Prof. Swapnil H., et al. "Modification of Two Wheeler to Run on LPG Fuel." International Journal of Advance Research and Innovative Ideas In Education, vol. 8, no. 1, 2022, pp. 1392-1397.
IEEE Style
Prof. Swapnil H. Kondo, Ujjwal S. Diwane, Lalit S. Deore, Akshay A. Daund, and Piyush R. Adhangale, "Modification of Two Wheeler to Run on LPG Fuel," International Journal of Advance Research and Innovative Ideas In Education, vol. 8, no. 1, pp. 1392-1397, 2022.
Vancouver Style
Kondo Prof. Swapnil H., Diwane Ujjwal S., Deore Lalit S., Daund Akshay A., Adhangale Piyush R.. Modification of Two Wheeler to Run on LPG Fuel. International Journal of Advance Research and Innovative Ideas In Education. 2022;8(1):1392-1397.
Harvard Style
Kondo, Prof. Swapnil H., Diwane, Ujjwal S., Deore, Lalit S., Daund, Akshay A., & Adhangale, Piyush R. (2022) 'Modification of Two Wheeler to Run on LPG Fuel', International Journal of Advance Research and Innovative Ideas In Education, 8(1), pp. 1392-1397.
Chicago Style
Kondo, Prof. Swapnil H., et al. "Modification of Two Wheeler to Run on LPG Fuel." International Journal of Advance Research and Innovative Ideas In Education 8, no. 1 (2022): 1392-1397.
Turabian Style
Kondo, Prof. Swapnil H., et al. "Modification of Two Wheeler to Run on LPG Fuel." International Journal of Advance Research and Innovative Ideas In Education 8, no. 1 (2022): 1392-1397.

Export Citation

Related Research

Recent Trends in Optimization of Process Parameters of TIG Welding Joints
Saurabh Gandhe 2026 Mechanican Engineering
PDF Unavailable
Designing And Manufacturing Of Mecanum Wheel
Pradyot Tajne et al. 2026 Engineering
PDF Unavailable
DESIGN AND FABRICATION OF PADDY DRYING SYSTEM WITH CONTROLLED AIR CIRCULATION
LAKAVATH VINAY et al. 2026 MECHANICAL ENGINEERING
PDF Unavailable
Experimental, Design and Development of different punch and die for head light reflectors
Amrut Chandanshive et al. 2026 Mechanical Engineering
PDF Unavailable
Experimental Analysis of Aluminium Hybrid Material using Analytical and Experimental Method
Prathmesh Shinde et al. 2026 Mechanical Engineering
PDF Unavailable
Effect of Slight Pitch Difference on the Fatigue Life of Bolt
Aslam Sheikh et al. 2026 Mechanical Engineering
PDF Unavailable
Stress Concentration Analysis of Cut out Orientation of Plates by Finite Element Analysis
Mahesh Arun Dhole et al. 2026 Mechanical Engineering
PDF Unavailable
Reduction of the Weight of Air Conditioning by Static and Model Analysis
Aditya Pawar et al. 2026 Mechanical Engineering
PDF Unavailable
Design and analysis of Tractor trolley rear axle for Weight reduction
Akshay Kharat et al. 2026 Mechanical Engineering
PDF Unavailable