Radiator and Evaporator Leak Testing Machine

Mechanical Engineering

This machine is manufactured as per the customer’s requirement and specific testing need. As the component is some form of a casting tube like structure which is leak tested. For this specific purpose and requirement of Leak Testing Machine the industry will train in terms of design and manufacturing of whole machine. Testing method was the most important consideration. For which Testing method is selected according to the applications of component. According to the first meeting with the customer the specified the component details that the component is an aluminum casting and should be leak tested. As it is a casting component not a machined component, if a crack is detected on a casting component then it is of no use as casted component cannot be welded or machined to fill the crack. For this purpose, dry leak test method is appropriate. As customer just needs to notify that the component has a crack. So, dry testing method is appropriate. When company needs to detect the location of the leakage of the component then use the wet leakage testing method. Whenever need to check leakage of radiator it’s possible to anywhere. When engine is overheated then radiator will be used for cooling the engine but the radiator not ok so its possibility of engine block.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.