A Review On Effect of Tool Geometry on Mechanical Properties of Friction Stir Welding of AA 6082-T6

Mechanical Engineering

Friction stir welding (FSW) is a novel solid state welding process for joining metallic alloys and has been employed in several industries such as aerospace and automotive for joining aluminum, magnesium and copper alloys. The various parameters such as rotational speed, welding speed, axial force and attack angle play vital role in FSW process in order to analyze the weld quality. The aim of this study is to investigate the effect of rotational speed, welding speed and tool pin profile on weld quality. Friction stir welds find use for structural and other fabrication industries. This report provides details of FSW equipment used and explains the effect of welding speed and rotational speed on the mechanical properties of butt joints in AA6082-T6 material of 5mm thickness for different tool profiles. Weld tensile strength was measured and influence of process parameters was assessed. The weld’s microstructure in various zones was analyzed using optical microscope. Microhardness measurements were performed on the weld’s cross-sections. As tool profile is vital, Special Design (SD) profiled pins were designed and manufactured for trials. The appearance of the weld was studied for surface defects and found to be small in weld nugget.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.