Modeling Of Electro Discharge Machining In Aisi 304 Material

Mr.Vijysing T. Rathod; Mr. Sayyad L.K.

Modeling Of Electro Discharge Machining In Aisi 304 Material

October 2015

Vol-1, Issue-3

Paper ID: 1221

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

Mechanical Engineering

Keywords

Electrical discharge machining thermo-physical model finite element method discharge current discharge voltage spark on time MRR.

Abstract

An axisymmetric three-dimensional thermo-physical model for the electrical discharge machining of AISI 304 was developed using finite element method and experiment on die sinking EDM have been conducted using L9 orthogonal array design using various process control parameter like voltage(V), Spark on time(Ton), Discharge current(Ip) which are varied in three different level. Material removal rate (MRR) for AISI 304 has been measured for each experimental run. Also the parametric analysis using ANSYS has been carried out by considering same process parameter to predict the MRR and result are verified with experimental investigation. The optimum values have been determined with the help of main effect plot and ANOVA table to find out optimum value and most significant parameter which affect the MRR. Commercial grade oil has been taken as dielectric fluid. MINITAB software has been used for mathematical modeling of MRR.

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	Mr.Vijysing T. Rathod	Aditya Engineering College, Beed,
2	Mr. Sayyad L.K.	Aditya Engineering College, Beed,

How to Cite

Use the following formats to cite this article in your research.

APA Style

Rathod, Mr.Vijysing T. & L.K., Mr. Sayyad (2015). Modeling Of Electro Discharge Machining In Aisi 304 Material. International Journal of Advance Research and Innovative Ideas In Education, 1(3), 188-197.

MLA Style

Rathod, Mr.Vijysing T., and Mr. Sayyad L.K.. "Modeling Of Electro Discharge Machining In Aisi 304 Material." International Journal of Advance Research and Innovative Ideas In Education, vol. 1, no. 3, 2015, pp. 188-197.

IEEE Style

Mr.Vijysing T. Rathod and Mr. Sayyad L.K., "Modeling Of Electro Discharge Machining In Aisi 304 Material," International Journal of Advance Research and Innovative Ideas In Education, vol. 1, no. 3, pp. 188-197, 2015.

Vancouver Style

Rathod Mr.Vijysing T., L.K. Mr. Sayyad. Modeling Of Electro Discharge Machining In Aisi 304 Material. International Journal of Advance Research and Innovative Ideas In Education. 2015;1(3):188-197.

Harvard Style

Rathod, Mr.Vijysing T. & L.K., Mr. Sayyad (2015) 'Modeling Of Electro Discharge Machining In Aisi 304 Material', International Journal of Advance Research and Innovative Ideas In Education, 1(3), pp. 188-197.

Chicago Style

Rathod, Mr.Vijysing T. and Mr. Sayyad L.K.. "Modeling Of Electro Discharge Machining In Aisi 304 Material." International Journal of Advance Research and Innovative Ideas In Education 1, no. 3 (2015): 188-197.

Turabian Style

Rathod, Mr.Vijysing T. and Mr. Sayyad L.K.. "Modeling Of Electro Discharge Machining In Aisi 304 Material." International Journal of Advance Research and Innovative Ideas In Education 1, no. 3 (2015): 188-197.