FABRICATION AND TESTING THE PROTOTYPE OF HAVOR BIKE

Ankit R. Zade; Rushikesh R. Ugale; Shubham S. Aher; Shubham P. Sonawane

FABRICATION AND TESTING THE PROTOTYPE OF HAVOR BIKE

June 2020

Vol-6, Issue-3

Paper ID: 12105

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

Mechanical Engineering

Keywords

Hover bike AFV Manoeuvre propellers Prototype Thrust CatiaV5 Solid Works

Abstract

The Hover bike prototype is a one-third scaled model of full-sized Hover bike (manned). This is an attempt to develop a prototype having propellers that are driven electrically integrating tilt motor mechanism, where servo motors are used to manoeuvre the model. The objective is to fabricate a light-weight weight prototype that contains a payload bay, attain longer endurance and range, reduction in the cost, utilize less power to realize lift, provide longer battery life, reduce programming steps and be simple in design compared to the prevailing drones. The mechanical design of the AFV comprised both the choice of a battery-motor gearing-prop combination for efficient thrust production as well as the planning of a light-weight yet sufficiently stiff vehicle structure. In addition to an efficient mechanical design, the vehicle also required onboard control and inertial guidance.

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	Ankit R. Zade	Sir Visvesvaraya Institute of Technology, Nashik
2	Rushikesh R. Ugale	Sir Visvesvaraya Institute of Technology, Nashik
3	Shubham S. Aher	Sir Visvesvaraya Institute of Technology, Nashik
4	Shubham P. Sonawane	Sir Visvesvaraya Institute of Technology, Nashik

How to Cite

Use the following formats to cite this article in your research.

APA Style

Zade, Ankit R., Ugale, Rushikesh R., Aher, Shubham S., & Sonawane, Shubham P. (2020). FABRICATION AND TESTING THE PROTOTYPE OF HAVOR BIKE. International Journal of Advance Research and Innovative Ideas In Education, 6(3), 1044-1047.

MLA Style

Zade, Ankit R., et al. "FABRICATION AND TESTING THE PROTOTYPE OF HAVOR BIKE." International Journal of Advance Research and Innovative Ideas In Education, vol. 6, no. 3, 2020, pp. 1044-1047.

IEEE Style

Ankit R. Zade, Rushikesh R. Ugale, Shubham S. Aher, and Shubham P. Sonawane, "FABRICATION AND TESTING THE PROTOTYPE OF HAVOR BIKE," International Journal of Advance Research and Innovative Ideas In Education, vol. 6, no. 3, pp. 1044-1047, 2020.

Vancouver Style

Zade Ankit R., Ugale Rushikesh R., Aher Shubham S., Sonawane Shubham P.. FABRICATION AND TESTING THE PROTOTYPE OF HAVOR BIKE. International Journal of Advance Research and Innovative Ideas In Education. 2020;6(3):1044-1047.

Harvard Style

Zade, Ankit R., Ugale, Rushikesh R., Aher, Shubham S., & Sonawane, Shubham P. (2020) 'FABRICATION AND TESTING THE PROTOTYPE OF HAVOR BIKE', International Journal of Advance Research and Innovative Ideas In Education, 6(3), pp. 1044-1047.

Chicago Style

Zade, Ankit R., et al. "FABRICATION AND TESTING THE PROTOTYPE OF HAVOR BIKE." International Journal of Advance Research and Innovative Ideas In Education 6, no. 3 (2020): 1044-1047.

Turabian Style

Zade, Ankit R., et al. "FABRICATION AND TESTING THE PROTOTYPE OF HAVOR BIKE." International Journal of Advance Research and Innovative Ideas In Education 6, no. 3 (2020): 1044-1047.