DESIGN OF 3WATT AUDIO AMPLIFIER USING IC TDA7056

VINAY RAJ.B.R; P VIKRAM REDDY; Ashwath Kiran D; Bharath Kumara

DESIGN OF 3WATT AUDIO AMPLIFIER USING IC TDA7056

November 2019

Vol-5, Issue-6

Paper ID: 11063

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

Electronics

Keywords

Melody generator Bridge Tied Load Multiplexer Potmeter Humming Ground loop PSSR Stereo TDA7056

Abstract

Generally the audio we hear have some noise in it ,in the same way the previous work progressed on this methodology had some distortion in it like humming problems(thus may be because of Turntables which effects at high power levels) and Ground loops., so This paper reports the design and implementation of a 3 Watt audio amplifier using TDA 7056 and try to get the clear audio(humming less audio output). 3 Watt audio amplifier TDA7056 only requires two capacitors for biasing and one potmeter the circuit analysis is presented and procedures for implementation are described. Before implementation, circuit simulation was carried to ensure that simulated results corresponded with the analysis already carried out this satisfactory result. We get good overall stability with gain of 40 DB. It has two section namely power supply and amplifier. This also agreed with design specifications and analysis. The overall result obtained indicates a satisfactory performance.

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	VINAY RAJ.B.R	Ramaiah University of Applied sciences
2	P VIKRAM REDDY	Ramaiah University of Applied sciences
3	Ashwath Kiran D	Ramaiah University of Applied sciences
4	Bharath Kumara	Ramaiah University of Applied sciences

How to Cite

Use the following formats to cite this article in your research.

APA Style

RAJ.B.R, VINAY, REDDY, P VIKRAM, D, Ashwath Kiran, & Kumara, Bharath (2019). DESIGN OF 3WATT AUDIO AMPLIFIER USING IC TDA7056. International Journal of Advance Research and Innovative Ideas In Education, 5(6), 726-730.

MLA Style

RAJ.B.R, VINAY, et al. "DESIGN OF 3WATT AUDIO AMPLIFIER USING IC TDA7056." International Journal of Advance Research and Innovative Ideas In Education, vol. 5, no. 6, 2019, pp. 726-730.

IEEE Style

VINAY RAJ.B.R, P VIKRAM REDDY, Ashwath Kiran D, and Bharath Kumara, "DESIGN OF 3WATT AUDIO AMPLIFIER USING IC TDA7056," International Journal of Advance Research and Innovative Ideas In Education, vol. 5, no. 6, pp. 726-730, 2019.

Vancouver Style

RAJ.B.R VINAY, REDDY P VIKRAM, D Ashwath Kiran, Kumara Bharath. DESIGN OF 3WATT AUDIO AMPLIFIER USING IC TDA7056. International Journal of Advance Research and Innovative Ideas In Education. 2019;5(6):726-730.

Harvard Style

RAJ.B.R, VINAY, REDDY, P VIKRAM, D, Ashwath Kiran, & Kumara, Bharath (2019) 'DESIGN OF 3WATT AUDIO AMPLIFIER USING IC TDA7056', International Journal of Advance Research and Innovative Ideas In Education, 5(6), pp. 726-730.

Chicago Style

RAJ.B.R, VINAY, et al. "DESIGN OF 3WATT AUDIO AMPLIFIER USING IC TDA7056." International Journal of Advance Research and Innovative Ideas In Education 5, no. 6 (2019): 726-730.

Turabian Style

RAJ.B.R, VINAY, et al. "DESIGN OF 3WATT AUDIO AMPLIFIER USING IC TDA7056." International Journal of Advance Research and Innovative Ideas In Education 5, no. 6 (2019): 726-730.