Parametric Optimization of 3-D Printer Printing Process to Minimize the Wrapping Deformation

Dr.K.P.Pawar; Prof. S.Z.Jadhav; Sinchan Dattatray Bhamhane; Prathamesh Shivaji Kale; Tanmay Surendra Iskande; Shubham Dnyaneshwar Handedeshmukh

Parametric Optimization of 3-D Printer Printing Process to Minimize the Wrapping Deformation

June 2019

Vol-5, Issue-3

Paper ID: 10408

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

Mechanical Engineering

Keywords

3D printing DOE Minitab17 Taguchi Method Wrapping Deformation Catia V5

Abstract

At the present time 3D printing has become a famous technology. This technology is in industries where the prototyping is an important limitation. The main aim of this study is to minimize the warp deformation that usually occurs to plastic part produced by 3D printers. The process involved 3D solid modeling to design using Catia V5, 3D printing with coated adhesive applied on the printing platform, warping deformation measurement using vernier height gauge and statistical analysis using Minitab 17 software. The optimization processes involved Design on Experiment (DOE) technique where Taguchi Method is applied by using Minitab 17 software. The experiment produced the minimum result of warping deformation value when the layer temperature, infill density, first layer height and other layer height is 160°C, 10%, 0.3mm and 0.3mm respectively.

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	Dr.K.P.Pawar	Sandip University,Nashik
2	Prof. S.Z.Jadhav	Sharadchandra Pawar College of Engineering,Otur,Pune
3	Sinchan Dattatray Bhamhane	Sharadchandra Pawar College of Engineering,Otur,Pune
4	Prathamesh Shivaji Kale	Sharadchandra Pawar College of Engineering,Otur,Pune
5	Tanmay Surendra Iskande	Sharadchandra Pawar College of Enginnering,Otur,Pune
6	Shubham Dnyaneshwar Handedeshmukh	Sharadchandra Pawar College of Engineering,Otur,Pune

How to Cite

Use the following formats to cite this article in your research.

APA Style

Dr.K.P.Pawar, S.Z.Jadhav, Prof., Bhamhane, Sinchan Dattatray, Kale, Prathamesh Shivaji, Iskande, Tanmay Surendra, & Handedeshmukh, Shubham Dnyaneshwar (2019). Parametric Optimization of 3-D Printer Printing Process to Minimize the Wrapping Deformation. International Journal of Advance Research and Innovative Ideas In Education, 5(3), 1200-1207.

MLA Style

Dr.K.P.Pawar, et al. "Parametric Optimization of 3-D Printer Printing Process to Minimize the Wrapping Deformation." International Journal of Advance Research and Innovative Ideas In Education, vol. 5, no. 3, 2019, pp. 1200-1207.

IEEE Style

Dr.K.P.Pawar, Prof. S.Z.Jadhav, Sinchan Dattatray Bhamhane, Prathamesh Shivaji Kale, Tanmay Surendra Iskande, and Shubham Dnyaneshwar Handedeshmukh, "Parametric Optimization of 3-D Printer Printing Process to Minimize the Wrapping Deformation," International Journal of Advance Research and Innovative Ideas In Education, vol. 5, no. 3, pp. 1200-1207, 2019.

Vancouver Style

Dr.K.P.Pawar, S.Z.Jadhav Prof., Bhamhane Sinchan Dattatray, Kale Prathamesh Shivaji, Iskande Tanmay Surendra, Handedeshmukh Shubham Dnyaneshwar. Parametric Optimization of 3-D Printer Printing Process to Minimize the Wrapping Deformation. International Journal of Advance Research and Innovative Ideas In Education. 2019;5(3):1200-1207.

Harvard Style

Dr.K.P.Pawar, S.Z.Jadhav, Prof., Bhamhane, Sinchan Dattatray, Kale, Prathamesh Shivaji, Iskande, Tanmay Surendra, & Handedeshmukh, Shubham Dnyaneshwar (2019) 'Parametric Optimization of 3-D Printer Printing Process to Minimize the Wrapping Deformation', International Journal of Advance Research and Innovative Ideas In Education, 5(3), pp. 1200-1207.

Chicago Style

Dr.K.P.Pawar, et al. "Parametric Optimization of 3-D Printer Printing Process to Minimize the Wrapping Deformation." International Journal of Advance Research and Innovative Ideas In Education 5, no. 3 (2019): 1200-1207.

Turabian Style

Dr.K.P.Pawar, et al. "Parametric Optimization of 3-D Printer Printing Process to Minimize the Wrapping Deformation." International Journal of Advance Research and Innovative Ideas In Education 5, no. 3 (2019): 1200-1207.