Optimization Of Process Parameters For Material Removal Rate Under Flooded And MQL Conditions
Abstract & Details
Research Area
Mechanical Engineering
Keywords
Taguchi Method
Vegetable Oil
EN-353 Alloy
Turning
Material Removal Rate (MRR)
Signal to noise (S/N) ratio etc.
Abstract
Ecological and environmental aspects of coolants are to be considered in machining. The use of Biodegradable oil can be an alternative source of coolants. This paper reports the experimental results of using coconut oil (vegetable oil) with MQL as an alternative cutting fluid while performing Turning operations on a Centre lathe machine using Carbide cutting tools and the Results of MQL and Flooded conditions were compared. The coolants prepared with the composition of 40%Coconut oil +40% oleic acid+20% Triethanol Amine are used for machining. Experiments were performed on a solid cylindrical workpeice of Alloy steel(EN353). Experimental result shows that during the turning operation the vegetable oil showed great cooling effect and lubrication under MQL and Flooded conditions. As it is also concluded that Vegetable oil a bio degradable oil resulted in less environmental effect compared to synthetic oils.
License
This work is licensed under a Creative Commons
Attribution-ShareAlike 4.0 International License.
Author Information
| # | Name | Institute / Affiliation |
|---|---|---|
| 1 | A.Venkata Vishnu | NNRG, Hyd, Telangana, India |
| 2 | M.Rajashekar | NNRG, Hyd, Telangana, India |
| 3 | P.Sai teja | NNRG, Hyd, Telangana, India |
| 4 | Shashi Prakash Upadhyay | NNRG, Hyd, Telangana, India |
| 5 | S.Sumanth | NNRG, Hyd, Telangana, India |
| 6 | M.Akash | NNRG, Hyd, Telangana, India |
How to Cite
Use the following formats to cite this article in your research.
APA Style
Vishnu, A.Venkata, M.Rajashekar, teja, P.Sai, Prakash Upadhyay, Shashi, S.Sumanth, & M.Akash (2017). Optimization Of Process Parameters For Material Removal Rate Under Flooded And MQL Conditions. International Journal of Advance Research and Innovative Ideas In Education, 2(2), 48-56.
MLA Style
Vishnu, A.Venkata, et al. "Optimization Of Process Parameters For Material Removal Rate Under Flooded And MQL Conditions." International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 2, 2017, pp. 48-56.
IEEE Style
A.Venkata Vishnu, M.Rajashekar, P.Sai teja, Shashi Prakash Upadhyay, S.Sumanth, and M.Akash, "Optimization Of Process Parameters For Material Removal Rate Under Flooded And MQL Conditions," International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 2, pp. 48-56, 2017.
Vancouver Style
Vishnu A.Venkata, M.Rajashekar, teja P.Sai, Prakash Upadhyay Shashi, S.Sumanth, M.Akash. Optimization Of Process Parameters For Material Removal Rate Under Flooded And MQL Conditions. International Journal of Advance Research and Innovative Ideas In Education. 2017;2(2):48-56.
Harvard Style
Vishnu, A.Venkata, M.Rajashekar, teja, P.Sai, Prakash Upadhyay, Shashi, S.Sumanth, & M.Akash (2017) 'Optimization Of Process Parameters For Material Removal Rate Under Flooded And MQL Conditions', International Journal of Advance Research and Innovative Ideas In Education, 2(2), pp. 48-56.
Chicago Style
Vishnu, A.Venkata, et al. "Optimization Of Process Parameters For Material Removal Rate Under Flooded And MQL Conditions." International Journal of Advance Research and Innovative Ideas In Education 2, no. 2 (2017): 48-56.
Turabian Style
Vishnu, A.Venkata, et al. "Optimization Of Process Parameters For Material Removal Rate Under Flooded And MQL Conditions." International Journal of Advance Research and Innovative Ideas In Education 2, no. 2 (2017): 48-56.
Related Research in this Conference
Velocity Effect Investigation on the Flow Parameters in Y-Duct
PDF Unavailable
EXPERIMENTAL STUDY ON MECHANICAL PROPERTIES AND ELECTRICAL CONDUCTIVITY OF NATURAL FIBRE REINFORCED COMPOSITE
PDF Unavailable