Experimental Investigations on CNC Turning of EN-36 Material Using Taguchi Method
Abstract & Details
Research Area
Mechanical Engineering
Keywords
Taguchi Method
EN-36 Alloy
Turning
Cutting Temperature
Analysis of Variance (ANOVA)
Signal to noise (S/N) ratio etc.
Abstract
In the present work, by using Taguchi methodology, the Turning of EN-36Alloy is carried out in order to optimize the turning process parameters. The present paper deals with the optimization of selected process parameters, i.e. Type of Lubricant, Cutting Speed, Feed rate and Depth of cut. The experiments are carried out using L9 (34) orthogonal array. Taguchi method stresses the importance of studying the response variation using the Analysis of Variance (ANOVA) and signal to noise (S/N) ratio, resulting the minimization of quality characteristic variation due to uncontrollable parameter. The Cutting temperature is considered as the quality characteristic in the concept of “the smaller the better”. The Cutting temperature measured from experiment and their optimum value for Cutting temperature are calculated. Analysis of Variance suggests that the selected cutting parameters are significant for the Cutting temperature.
License
This work is licensed under a Creative Commons
Attribution-ShareAlike 4.0 International License.
Author Information
| # | Name | Institute / Affiliation |
|---|---|---|
| 1 | Venkata Vishnu | NNRG, Hyd, Telangana |
| 2 | E.Sanjana | IARE, Hyd, Telangana |
| 3 | G.Guruvaiah Naidu | Usha Rama College of Engineering & Technology |
How to Cite
Use the following formats to cite this article in your research.
APA Style
Vishnu, Venkata, E.Sanjana, & Naidu, G.Guruvaiah (2017). Experimental Investigations on CNC Turning of EN-36 Material Using Taguchi Method. International Journal of Advance Research and Innovative Ideas In Education, 2(2), 1-6.
MLA Style
Vishnu, Venkata, et al. "Experimental Investigations on CNC Turning of EN-36 Material Using Taguchi Method." International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 2, 2017, pp. 1-6.
IEEE Style
Venkata Vishnu, E.Sanjana, and G.Guruvaiah Naidu, "Experimental Investigations on CNC Turning of EN-36 Material Using Taguchi Method," International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 2, pp. 1-6, 2017.
Vancouver Style
Vishnu Venkata, E.Sanjana, Naidu G.Guruvaiah. Experimental Investigations on CNC Turning of EN-36 Material Using Taguchi Method. International Journal of Advance Research and Innovative Ideas In Education. 2017;2(2):1-6.
Harvard Style
Vishnu, Venkata, E.Sanjana, & Naidu, G.Guruvaiah (2017) 'Experimental Investigations on CNC Turning of EN-36 Material Using Taguchi Method', International Journal of Advance Research and Innovative Ideas In Education, 2(2), pp. 1-6.
Chicago Style
Vishnu, Venkata, E.Sanjana, and G.Guruvaiah Naidu. "Experimental Investigations on CNC Turning of EN-36 Material Using Taguchi Method." International Journal of Advance Research and Innovative Ideas In Education 2, no. 2 (2017): 1-6.
Turabian Style
Vishnu, Venkata, E.Sanjana, and G.Guruvaiah Naidu. "Experimental Investigations on CNC Turning of EN-36 Material Using Taguchi Method." International Journal of Advance Research and Innovative Ideas In Education 2, no. 2 (2017): 1-6.
Related Research in this Conference
Velocity Effect Investigation on the Flow Parameters in Y-Duct
PDF Unavailable
EXPERIMENTAL STUDY ON MECHANICAL PROPERTIES AND ELECTRICAL CONDUCTIVITY OF NATURAL FIBRE REINFORCED COMPOSITE
PDF Unavailable