TO COMPARE TECHNOLOGIES FOR TREATMENT OF DIFFERENT TYPES OF METAL CUTTING FLUID

JAINESH K PATEL; Associate Proff Minarva J Pandya

TO COMPARE TECHNOLOGIES FOR TREATMENT OF DIFFERENT TYPES OF METAL CUTTING FLUID

May 2016

Vol-2, Issue-3

Paper ID: 2179

ISSN: 2395-4396

Downloads: 0

Abstract & Details

Research Area

Environment Engineering

Keywords

Metal Cutting Fluid (MCF’s) Electrolytes Emulsion breakdown Fenton’s process Electrocoagulation Recovery & Reuse Chemical Oxygen Demand (COD).

Abstract

The aim of this work is to evaluate the use of electrolytes in the breakdown of waste of cutting fluid emulsion, reusing the recovered phase to develop the reuse in making new cutting fluid, and for the removal of COD FENTON’s process was used on the fluid which was left before discharging. The different technologies for different Metal Cutting Fluids (MCFs) were observed and from that which method is effectively suitable for treatment of different MCFs were selected. Three metal cutting fluids were used to evaluate the comparison by different methods: Synthetic cutting fluid (water-in-oil), Semi-synthetic cutting fluid(oil-in-water), Mineral oils, all the MCF’s collected in the emulsified form. The technologies used for recovery of waste oil is Electrocoagulation and Fenton’s process for removal of COD. The physicochemical properties of these new cutting fluids were close to the ones of the initial ones, except the viscosity values which increased.

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author Information

#	Name	Institute / Affiliation
1	JAINESH K PATEL	L.D COLLEGE OF ENGINEERING
2	Associate Proff Minarva J Pandya	L.D COLLEGE OF ENGINEERING

How to Cite

Use the following formats to cite this article in your research.

APA Style

PATEL, JAINESH K & Pandya, Associate Proff Minarva J (2016). TO COMPARE TECHNOLOGIES FOR TREATMENT OF DIFFERENT TYPES OF METAL CUTTING FLUID. International Journal of Advance Research and Innovative Ideas In Education, 2(3), 528-535.

MLA Style

PATEL, JAINESH K, and Associate Proff Minarva J Pandya. "TO COMPARE TECHNOLOGIES FOR TREATMENT OF DIFFERENT TYPES OF METAL CUTTING FLUID." International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 3, 2016, pp. 528-535.

IEEE Style

JAINESH K PATEL and Associate Proff Minarva J Pandya, "TO COMPARE TECHNOLOGIES FOR TREATMENT OF DIFFERENT TYPES OF METAL CUTTING FLUID," International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 3, pp. 528-535, 2016.

Vancouver Style

PATEL JAINESH K, Pandya Associate Proff Minarva J. TO COMPARE TECHNOLOGIES FOR TREATMENT OF DIFFERENT TYPES OF METAL CUTTING FLUID. International Journal of Advance Research and Innovative Ideas In Education. 2016;2(3):528-535.

Harvard Style

PATEL, JAINESH K & Pandya, Associate Proff Minarva J (2016) 'TO COMPARE TECHNOLOGIES FOR TREATMENT OF DIFFERENT TYPES OF METAL CUTTING FLUID', International Journal of Advance Research and Innovative Ideas In Education, 2(3), pp. 528-535.

Chicago Style

PATEL, JAINESH K and Associate Proff Minarva J Pandya. "TO COMPARE TECHNOLOGIES FOR TREATMENT OF DIFFERENT TYPES OF METAL CUTTING FLUID." International Journal of Advance Research and Innovative Ideas In Education 2, no. 3 (2016): 528-535.

Turabian Style

PATEL, JAINESH K and Associate Proff Minarva J Pandya. "TO COMPARE TECHNOLOGIES FOR TREATMENT OF DIFFERENT TYPES OF METAL CUTTING FLUID." International Journal of Advance Research and Innovative Ideas In Education 2, no. 3 (2016): 528-535.